Epson U590P User Manual - Page 6
Removing the Damper, Using the Power Switch Cover, Installing the Ribbon Cassette - tm manual
View all Epson U590P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English Removing the Damper The printer is protected for shipping by 1 a transportation damper that you must remove before you turn on the printer. Open the printer by pulling the tab on the front cover, and remove the damper shown in illustration 1. Note: Reinstall the damper before shipping. Using the Power Switch Cover WARNING: If an accident occurs with the power switch cover attached, unplug the power cord 2 immediately. Continued use may cause EPSON fire. The enclosed power switch cover keeps the power switch from being pressed accidentally. To use the cover, install it as shown in illustration 2. FORWARD REVERSE SRLIEEPPRLOERAWOSREER RELEASE Installing the Ribbon Cassette Use the EPSON ERC-31 ribbon cassette. The use of any ribbon cassettes other than those approved by EPSON may damage the printer and will void the warranty. CAUTION: Never turn the ribbon cassette's feed knob in the opposite direction of the arrow marked on the cassette; otherwise the ribbon cassette may be damaged. 1. Turn the printer on, and open the front cover by pulling up the tab on the left side. 2. Be sure the print head is on the right side. 3. If a ribbon is already installed, remove it by grasping the end of the tab and removing it from the printer. 6 TM-U590/TM-U590P User's Manual