Epson V11H128020 Installation Guide - ELPMBUNI Universal Mount Assembly - Page 13
Leveling the Mounting bracket, CAUTION,
UPC - 010343847408
View all Epson V11H128020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ELPMBUNI Leveling the Mounting bracket 1. Rotate the leveling barrels to level the mounting bracket next, position the mounting bracket so that it avoids most, if not all, ventilation points (including lamp & filter access doors). 2. When the position desired is achieved tighten the mounting hardware to the projector then tighten the hex head leg screws with the Allen wrench (supplied) (Figure 8 and Figure 9). CAUTION: Secure but do not over-tighten the mounting hardware. Failure to do so will result in damaging the threads in the projector. Allen Wrench Level Inverted Projector DOWN UP Adjusting the Mount Figure 8 Leveling Barrels Page - 14 - Installation Manual
ELPMBUNI
Page - 14 -
Installation Manual
Leveling the Mounting bracket
1.
Rotate the leveling barrels to level the mounting bracket next, position the mounting bracket so that it
avoids most, if not all, ventilation points (including lamp & filter access doors).
2.
When the position desired is achieved tighten the mounting hardware to the projector then tighten the hex
head leg screws with the Allen wrench (supplied) (Figure 8 and Figure 9).
CAUTION
:
Secure but do not over-tighten the mounting hardware. Failure to do so will result in
damaging the threads in the projector.
UP
DOWN
Figure 8
Level
Allen Wrench
Leveling
Barrels
Inverted Projector
Adjusting the Mount