Epson V11H248020 Quick Reference Guide - (Accolade Wireless Audio Set ) - Page 19

Using the Wireless Audio Set Powering On Your Equipment 1. Push the P button on the transmitter. The P light turns solid green. 2. Push the P button on the receiver. The P light turns solid green. 3. Make sure that the LINK light on the transmitter and receiver is solid green. Note: If the LINK lights are not solid green, there is no connection between the transmitter and receiver. Make sure that there is direct line of sight between the two antennas and that the transmitter and receiver are less than 19.7 feet (6 meters) apart. If the LINK lights are still not solid green, see "Solving Problems" on page 21. 4. Turn on your Epson MovieMate or DVD player. 5. Turn on your audio system. You're ready to start watching a movie. Note: If the transmitter doesn't receive an audio signal for more than 5 minutes, it will automatically go into standby mode. If it still hasn't received an audio signal after 25 minutes, it will turn off automatically. Press the P button to turn it back on again. If you don't have any audio output, make sure that the volume control on your audio system is not turned all the way down or muted; see "Controlling Volume" on page 20. If you still don't hear any audio, see "Solving Problems" on page 21. Using the Wireless Audio Set 19