Epson V11H313020 Quick Start - Page 2

Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. 3 Open the A/V Mute slide all the way. 3 Press the Focus buttons to sharpen the image. Turn the zoom ring to reduce or enlarge the image. Focus Zoom 4 If your image looks like or , you've placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely. 5 If your image looks like or , press the or buttons on the projector to correct it. Using the remote control Make sure the batteries are installed as shown (two AA batteries). 4 Press the power button on the projector or remote control. Power light Power button The power light flashes green, then stays on. NOTE: To shut down the projector, press the power button twice, then unplug it. You don't have to wait for the projector to cool down. Adjust the image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the gray foot release lever and lift the front of the projector. Release the lever to lock the foot in position. Turn projector on and off Turn off projector display and sound Change presentation slides (USB connection only) Navigate projector menus Choose which source to display Control projector volume You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your User's Guide.