Epson VS340 User Manual - Page 2

Adjust the image, Using the remote control, Troubleshooting - lcd projector

Get Epson VS340 PDF manuals and user guides View all Epson VS340 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

Adjust the image 1 If you don't see an image, press the Source Search button on the projector or remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. 3 VS340/VS345: To reduce or enlarge the image, turn the zoom ring.  VS240: To reduce or enlarge the image, press the T (reduce) or W (enlarge) buttons on the projector. VS340/VS345 VS240 4 Turn the focus ring to sharpen the image. VS340/VS345 VS240 5 If your image looks like or , you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can't move the projector, use the horizontal keystone slider on the projector to correct the image shape. VS340/VS345 VS240 6 Your projector automatically adjusts images that look like or , but if necessary you can press the or button on the projector to correct it. Using the remote control Make sure the batteries are installed as shown (two AA batteries). Turn projector on and off Choose which source to display Access projector menus Navigate projector menus Turn off projector display Get solutions to common problems For more information on using the remote control, see the online User's Guide. Troubleshooting If you see a blank screen or the No signal message after turning on your computer or video device, check the following: •• Make sure the Status light on the projector is blue and not flashing, and the A/V Mute slide is open. •• Press the Source Search button on the projector or the remote control to switch to the correct image source, if necessary. •• If you're using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear. •• If you're using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox. Where to get help Manuals For more information about using the projector, click the icons on your desktop to access the online manuals (requires an Internet connection). If you don't see icons to the manuals, you can install them from the projector CD or go to the Epson website, as described below.

  • 1
  • 2
  • 3
  • 4
Adjust the image
1
If you don’t see an image, press the
Source Search
button on the
projector or remote control to select the image source.
Note:
If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
VS340/VS345:
To reduce or enlarge the image, turn the zoom ring.
VS240:
To reduce or enlarge the image, press the
T
(reduce) or
W
(enlarge) buttons on the projector.
VS340/VS345
VS240
4
Turn the focus ring to sharpen the image.
VS340/VS345
VS240
5
If your image looks like
or
, you may have placed the projector
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can’t
move the projector, use the horizontal keystone slider on the projector to
correct the image shape.
VS340/VS345
VS240
6
Your projector automatically adjusts images that look like
or
,
but if necessary you can press the
or
button on the projector to
correct it.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Choose which source
to display
Turn projector
on and off
Access projector
menus
Turn off projector
display
Get solutions to
common problems
Navigate projector
menus
For more information on using the remote control, see the online
User’s
Guide
.
Troubleshooting
If you see a blank screen or the
No signal
message after turning on your
computer or video device, check the following:
•
Make sure the Status light on the projector is blue and not flashing, and
the A/V Mute slide is open.
•
Press the
Source Search
button on the projector or the remote control
to switch to the correct image source, if necessary.
•
If you’re using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD
or have an icon such as
. You may have to hold down the
Fn
key while pressing it (such as
Fn
+
F7
). Wait a moment for the display
to appear.
•
If you’re using a Mac laptop, open
System Preferences
and select
Displays
. Click the
Arrangement
tab and select the
Mirror Displays
checkbox.
Where to get help
Manuals
For more information about using the projector, click the icons on your
desktop to access the online manuals (requires an Internet connection). If you
don’t see icons to the manuals, you can install them from the projector CD or
go to the Epson website, as described below.