Epson VS400 Start Here - Page 1

VS400 Quick Setup Before using the projector, make sure you read the safety instructions in the User's Guide on your projector CD. Connect the projector Choose from the following connections: Computer Monitor Port Connect a computer using the VGA cable that came with the projector. Video Device Connect up to 3 video devices and use the remote control to switch between them. RCA video cable S-Video Computer (composite video) cable cable (optional) (optional) (included) Component video to VGA cable (optional) Connect one end to the projector's Computer port, and the other end to your computer's monitor port. If you are using a notebook, switch it to external display. Computer USB Port Connect a computer (Windows® 2000 or later, 32-bit only) to the projector using a USB cable. Connect the square end of the USB cable to the projector's USB TypeB port. Connect the flat end of the cable to any USB port on your computer. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. The power light on the projector turns orange. 3 Open the A/V Mute slide all the way. 4 Press the power button on the projector or remote control. After turning on the projector, follow the on-screen instructions to install the Epson USB Display software. (You need to install the software only the first time you connect.) Then press the USB button on the remote control to select the image source. The projector beeps, the power light flashes green, and then stays on. NOTE: To shut down the projector, press the power button twice, then unplug it. You don't have to wait for the projector to cool down. *411913800* *411913800*