Epson WorkForce 320 Start Here - Page 3

7 Install software 1 Make sure the printer is NOT CONNECTED to your computer. 5 M ac OS® X 10.4 only: When you see this screen, click Add Printer & Fax. Follow the steps on the right side of the screen to add your printer. Click Next to continue, if necessary. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. You can't install your software that way. 2 Insert your product CD. W indows: If you see the AutoPlay window, click Run Setup.exe. If you see the User Account Control screen, click Yes or Continue. Macintosh®: Double-click the Epson icon. 3 Click Install and follow the on-screen instructions. 4 When prompted, connect the USB cable. Use any open USB port on your computer. Make sure the printer is turned on. 6 Follow the on-screen instructions to install the rest of the software and register your printer. 7 When you're done, remove the CD. Control panel Turn power LCD display Clear settings Set to receive faxes on/off screen for the mode automatically you're using Stop/ Clear Settings B&W Color Auto Answer Speed Dial/ Group Dial Redial/Pause Select Copy Navigate Start copy Enter fax One-touch or Fax mode menus or fax (B&W numbers for dial buttons or Color) dialing Any problems? You see error messages on the printer's LCD screen. See your Quick Guide for troubleshooting information. Setup is unable to find my printer after connecting it with a USB cable. Make sure it is securely connected as shown: