Epson WorkForce 323 Start Here - Page 3

7 Choose your connection You can connect your printer to your existing wireless network or directly to your computer using a USB cable (not included). See below for details on each connection method. Wireless Connection You must install the software on every computer from which you want to print. For the first installation, we recommend using a USB cable (not included) to simplify wireless setup. After the printer is connected to the network, you will be prompted to remove the USB cable. If you're using Mac OS® X 10.6.x or don't have a USB cable, you need to use the buttons on the printer to select wireless settings. Make sure you know your network name (SSID) and network password: • Network name • Network password If you don't have this information, contact the person who set up your network. Direct USB Connection Make sure you have a USB cable (not included). Do not connect the printer to your computer until you're instructed to do so. 8 Install software 1 Make sure the printer is NOT CONNECTED to your computer. 3 Click Install and follow the on-screen instructions. Any problems? If you experience problems during setup, see below: Network setup was unsuccessful. • Make sure you select the right network name. • If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. If it has uppercase (ABC) or lowercase (abc) letters, make sure you enter them correctly. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. You can't install your software that way. 2 Insert your product CD. W indows: If you see the AutoPlay window, click Run Setup.exe. If you see the User Account Control screen, click Yes or Continue. Macintosh®: Double-click the Epson icon. Press the numeric keypad buttons as necessary to select uppercase letters (ABC), lowercase letters (abc), or numbers and symbols (123). Press to move to the next character. Press to delete. Press the OK button when you're finished entering your password. • If you see a firewall alert message, click Unblock or Allow to let setup continue. You see error messages on the printer's LCD display screen. See your Quick Guide for troubleshooting information. Setup is unable to find my printer after connecting it with a USB cable. Make sure it is securely connected as shown: