Epson WorkForce 840 Start Here - Page 1

WorkForce® 840 Series Start Here Read these instructions before using your product. 1 Unpack 2 P ress the release bar underneath to raise the control panel. Then press the On button. To lower the control panel, press the release bar underneath. Phone cord Power cord Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials. Caution: Do not remove the plastic strip shown below. It is part of the Automatic Document Feeder. 2 Turn on 1 Connect the power cable. 3 Select settings 1 Select your language and country. Touch the screen to select the desired option. Press or to see more countries. 2 Select the current Daylight Saving Time setting (Winter or Summer). 3 Select the date format. 4 Use the numeric keypad to set the date, then press OK. 5 Select 12h (AM/PM) or 24h (military time). 6 Use the numeric keypad to set the time. 7 Press OK when done. N ote: You can change the date and time settings by selecting Setup from the Home menu, selecting Printer Setup, then Date/Time. For more information on using and adjusting the control panel, see your Quick Guide. 4 Install ink cartridges 1 Raise the scanner. Caution: Do not connect to your computer yet. *411974200* *411974200* 2 Open the cartridge cover.