Epson WorkForce Pro WF-C879R Users Guide - Page 376
LCD screen message, Condition/solution, Paper Setup Auto Display, Line Type, Dial Tone Detection
View all Epson WorkForce Pro WF-C879R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 376 highlights
LCD screen message Condition/solution Maintenance roller in XX is nearing the end of its service life. The paper cassette rollers need to be replaced periodically for optimal performance. (Paper may not feed correctly from the paper cassette when the roller is near the end of its service life.) Contact Epson for support. Maintenance roller in XX is at the end Replace the paper cassette roller indicated and reset the of its service life. Replace it and reset counter. Contact Epson for support. the maintenance roller counter. You need to replace Ink Supply Unit(s). Replace the indicated ink packs. Paper Setup Auto Display is set to Off. Some features may not be available. For details, see your documentation. AirPrint is not available when the Paper Setup Auto Display setting is disabled. Change Paper Setup Auto Display to On. No dial tone is detected. Make sure the phone cable is connected correctly and the phone line works. If you connected the product to a PBX (Private Branch Exchange) phone line or Terminal Adapter, change the Line Type setting to PBX. If you still cannot send a fax, turn off the Dial Tone Detection setting. (Turning off the Dial Tone Detection setting may cause the product to drop the first digit of a fax number.) Failed to receive faxes because the Press the Job/Status button and select Printer Status and fax data capacity is full. Touch the resolve any printer errors that prevented faxes from printing. Job/Status at the bottom of the Home Make sure the product is connected to a computer or that a USB Screen for details. device is connected to the product. The combination of the IP address There is a problem with the network connection to your product. and the subnet mask is invalid. See Set up your product on the network again. your documentation for more details. To use cloud services, update the root certificate from the Epson Web Config utility. Access the Web Config utility and update the cloud service root certificate. Check that the printer driver is installed on the computer and that the port settings for the printer are correct. Make sure the printer port is correctly configured. In Windows, make sure the port is set to a USBXXX setting for a USB connection or Epsonnet Print Port for a network connection. 376