Epson WorkForce Pro WP-4090 Start Here - Page 2

4 Load paper in the cassette You can load letter-, A4-, or legal-size plain paper in the cassette. For instructions on loading envelopes and special paper in the rear MP tray, see the online User's Guide. 1 Pull out the paper cassette. 4 Slide the edge guides against the paper, but not too tight. Make sure the paper is under the tabs on the edge guides. 5 Gently insert the paper cassette. 2 Slide the edge guides outward, and position them for the size of paper you are using. N ote: If you are loading legal-size paper, extend the cassette as shown. N ote: The paper may slide forward slightly as you insert the cassette. This is normal. 6 Extend the output tray and raise the paper stopper as shown. (Do not raise the stopper for legal-size paper.) 3 Insert the paper with the glossy or printable side face down. N ote: Make sure the paper is loaded against the front edge guide and not sticking out from the end of the cassette. 5 Install software If you're using the product as a laser printer replacement, you do not need to install any Epson drivers. Note: To use the Fax Utility and Epson Status Monitor, install the standard Epson driver. If you want to install multiple drivers, repeat the software installation process as necessary. For more information, see your online User's Guide. If you want to install Epson drivers, follow the steps below. Note: If a computer does not have a CD/DVD drive, you can download the software from the Epson website (see "Epson technical support"). Caution: Be sure to close any other programs, including any screen savers and virus protection software, before beginning this software installation. 1 Make sure the printer is NOT CONNECTED to a computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. You can't install your software that way.