Epson WorkForce Pro WP-4520 Notices - Page 2

LCD Screen Safety Instructions, Ink Cartridge Safety Instructions

Get Epson WorkForce Pro WP-4520 PDF manuals and user guides View all Epson WorkForce Pro WP-4520 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

■ Do not touch the flat white cable inside the product. ■ Do not move the print head by hand; this may damage the product. ■ Do not spill liquid on the product or use the product with wet hands. ■ Do not use aerosol products that contain flammable gases inside or around the product. Doing so may cause fire. ■ Except as specifically explained in your documentation, do not attempt to disassemble or service any part of the product yourself. ■ Unplug the product and refer servicing to qualified service personnel under the following conditions: if the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped or the case damaged; if the product does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions. ■ If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are fuses in the plug, make sure you replace them with fuses of the correct size and rating. ■ Leave the ink cartridges installed. Removing the cartridges can dehydrate the print head and may prevent the product from printing. ■ Before transporting the product, make sure that the print head is in the home (far right) position and the ink cartridges are in place. ■ When storing or transporting the product, do not tilt it, stand it on its side, or turn it upside down; otherwise ink may leak from the cartridges. ■ To avoid adversely affecting the operation of the following equipment and causing an accident, do not use the product: near medical equipment in a medical facility; within 8.7 inches (22 cm) of a cardiac pacemaker; near automatically controlled devices, such as automatic doors or fire alarms. ■ Do not press too hard on the scanner glass when placing originals. Be careful not to trap your fingers when closing the scanner cover. LCD Screen Safety Instructions ■ Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers. ■ If the screen is damaged, contact Epson. If the liquid crystal solution gets on your hands, wash them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush them immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor immediately. Ink Cartridge Safety Instructions ■ Keep ink cartridges out of the reach of children. ■ Be careful when you handle used ink cartridges; there may be ink remaining around the ink supply port. If ink gets on your skin, wash it thoroughly with soap and water. If it gets in your eyes, flush them immediately with water. If ink gets in your mouth, spit it out and see a doctor right away. 2 Important Safety Instructions

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
2
Important Safety Instructions
■
Do not touch the flat white cable inside the product.
■
Do not move the print head by hand; this may damage the product.
■
Do not spill liquid on the product or use the product with wet hands.
■
Do not use aerosol products that contain flammable gases inside or around the product. Doing
so may cause fire.
■
Except as specifically explained in your documentation, do not attempt to disassemble or
service any part of the product yourself.
■
Unplug the product and refer servicing to qualified service personnel under the following
conditions: if the power cord or plug is damaged; if liquid has entered the product; if the
product has been dropped or the case damaged; if the product does not operate normally or
exhibits a distinct change in performance. Adjust only those controls that are covered by the
operating instructions.
■
If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are
fuses in the plug, make sure you replace them with fuses of the correct size and rating.
■
Leave the ink cartridges installed. Removing the cartridges can dehydrate the print head and
may prevent the product from printing.
■
Before transporting the product, make sure that the print head is in the home (far right)
position and the ink cartridges are in place.
■
When storing or transporting the product, do not tilt it, stand it on its side, or turn it upside
down; otherwise ink may leak from the cartridges.
■
To avoid adversely affecting the operation of the following equipment and causing an accident,
do not use the product: near medical equipment in a medical facility; within 8.7 inches (22 cm)
of a cardiac pacemaker; near automatically controlled devices, such as automatic doors or fire
alarms.
■
Do not press too hard on the scanner glass when placing originals. Be careful not to trap your
fingers when closing the scanner cover.
LCD Screen Safety Instructions
■
Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers.
■
If the screen is damaged, contact Epson. If the liquid crystal solution gets on your hands, wash
them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush
them immediately with water. If discomfort or vision problems remain after a thorough
flushing, see a doctor immediately.
Ink Cartridge Safety Instructions
■
Keep ink cartridges out of the reach of children.
■
Be careful when you handle used ink cartridges; there may be ink remaining around the ink
supply port. If ink gets on your skin, wash it thoroughly with soap and water. If it gets in your
eyes, flush them immediately with water. If ink gets in your mouth, spit it out and see a doctor
right away.