Epson WorkForce WF-2930 Start Here - Installation Guide - Page 1
Epson WorkForce WF-2930 Manual
View all Epson WorkForce WF-2930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
WF-2930/WF-2950 Start Here 3 Lower the scanner unit: Lift the scanner unit up slightly and lower it. When the scanner unit catches, lift it up again and lower it completely. IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. Note: This printer is designed for use with Epson® cartridges only, not third-party cartridges or ink. For important ink information, visit http://epson.com/epsonink (U.S.) or http://epson.ca/epsonink (Canada) or see your printer box. Important Safety Instructions: When using telephone equipment, you should always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury, including the following: • Do not use the Epson product near water. • Always keep this guide handy. • Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning. • Do not use a telephone to report a gas leak in the vicinity of the leak. Caution: To reduce the risk of fire, use only a No. 26 AWG or larger telecommunication line cord. The illustrations show the WF-2950, but the steps are the same for the WF-2930, unless otherwise specified. 1 Unpack Note: Do not open the ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. 1 Remove all protective materials from the product and lift up the scanner unit until it locks into place. Note: The scanner unit must be lowered completely before it can be opened again. 4 Connect the power cord to the back of the product and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Choose a setup method The Epson Smart Panel® app can help you set up your printer through an interactive, step-by-step process using your smartphone or tablet. OR To use your mobile device for setup, continue to step 1. If you do not want to use a mobile device for setup, skip to the "Turn on and configure" section. 1 Download the Epson Smart Panel app from your device's app store. Do not launch the app yet. 2 Hold the power button until it lights up to turn on the product. 2 Remove all protective materials from inside the product. Caution: Do not touch the flat white cable. Note: Do not connect your product to your computer yet. 3 Launch the app and follow its instructions to set up your product. If necessary, tap the + icon on the top right corner of the app's home screen, tap Start setting up, and follow the instructions to set up your product. For information on connecting your product to a computer, using voice-activated printing, or solving problems, or for details on reaching Epson support, see the sections on the back of this sheet.