Epson WorkForce WF-3530 Start Here - Page 3

7 Install software Note: If your computer does not have a CD/DVD drive, you can download the software from the Epson website (see "Epson technical support"). Caution: Be sure to close your other programs, including any screen savers and virus protection programs, before beginning this software installation. 1 Make sure the printer is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. You can't install your software that way. 2 Insert your product CD. 3 W indows 8: Click the CD/DVD drive message that appears on your computer screen. Then select Run Setup.exe. If you don't see this option, navigate to your CD/DVD drive and double-click Setup. Windows (other versions): If you see the AutoPlay window, click Run Setup.exe. Mac OS X: Double-click the Epson icon. 4 Click Install (Windows) or Continue (Mac OS X) and follow the instructions on your computer screen. 5 When you see the Select Your Connection screen, check the "Connection options" section on this sheet for more information. Choose your connection. Then click Next (Windows) or Continue (Mac OS X) and follow the instructions on your computer screen. Connection options Wireless connection You must install the software on every computer from which you want to print. For the first installation, we recommend using a USB cable (not included) to simplify wireless setup. After the printer is connected to the network, you will be prompted to remove the cable. If you're using Mac OS X 10.6.x, 10.7.x, or 10.8.x, or you don't have a USB cable, you will need to use the control panel on the printer to select wireless settings. Follow the instructions on your computer screen during software installation; they will explain how to connect the printer wirelessly this way. Make sure you know your network name (SSID) and network password: • Network name • Network password If you don't have this information, contact the person who set up your network. To view how-to videos on setting up your printer's wireless connection, go to epson.com/support (U.S.) or epson.ca/support (Canada). Direct USB connection Make sure you have a USB cable (not included). Wired network connection Make sure you have an Ethernet network cable (not included). You must install the software on every computer from which you want to print. Any problems? If you experience problems during setup, see below: Network setup was unsuccessful. • Make sure you select the right network name (SSID). • If you see a firewall alert message, click Unblock or Allow to let setup continue. • If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. Passwords must be entered in the correct case. Use the function buttons to select uppercase (AB12), lowercase (ab12), symbols, or spaces, and to delete characters. Function buttons Press on the printer to highlight a letter or function button. Press OK to select it. Highlight Done and press OK. The printer's screen is dark. Press a button to wake the printer from sleep mode.