Epson XP-330 User Manual - Page 1
Epson XP-330 Manual
View all Epson XP-330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
XP-330/XP-430/XP-434 Small-in-One® Printer English Start Here Read these instructions before using your product. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, consulte la Guía de instalación en www.epson.com/support/xp330sp, www.epson.com/support/xp430sp o www.epson.com/support/xp434sp (requiere una conexión a Internet). 1 Unpack Note: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. 2 Turn on and configure 1 2 Caution: Do not connect to your computer yet. 2 1 Caution: Do not lower the control panel without first squeezing the release bar underneath or you may damage the product. 3 Install ink cartridges To select English as your language, press OK. If you want to change the language, press or to select it, then press OK. Note: You can change the language later using the product's control panel. For more information, see the online User's Guide. 4 Load paper 3 4 1 2 Press to prime the ink delivery system. Priming takes 1 about 4 minutes. Note: • The printer is designed for use with Epson® cartridges only, not third-party cartridges or ink. 4 minutes • The cartridges included with the printer are designed for printer setup and not for resale. After some ink is used for 2 priming, the rest is available for printing. Caution: Don't turn off the printer while it is priming or you'll waste ink. 2 1 Check the current paper settings on the control panel. To use these settings, press OK. If you want to change the settings, press or to select Change, then press OK. Select paper size, press OK, select paper type, then press OK to confirm settings. 8½ × 11 inch (216 × 279 mm) 4 × 6 inch (102 × 152 mm)