Epson XP-430 User Manual - Page 40
Enabling Wi-Fi Direct Mode, Wi-Fi Networking - wifi setup
View all Epson XP-430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Peer-to-peer mode The product communicates one-to-one with another Wi-Fi Direct capable device. When operating in this mode, your product displays a Direct or D connection symbol on the LCD screen. To disconnect a peer-to-peer mode connection, release the connection to your product from your computer or other device. To enable peer-to-peer mode, you must select it from the Web Config Utility, under WiFi/Network Settings > Services > Wi-Fi Direct. Enabling Wi-Fi Direct Mode Parent topic: Wi-Fi Networking Enabling Wi-Fi Direct Mode You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or other devices without a wireless router or access point. 1. Press the home button, if necessary. 2. Press the left or right arrow button to select Wi-Fi Setup and press the OK button. You see this screen: 3. Press the up or down arrow button to select Wi-Fi Direct Setup and press the OK button. 4. Make sure Connection Setup is highlighted, then press the OK button. 40