Epson XP-530 User Manual - Page 2
Load paper, XP-630/XP-830, XP-530 - ink
View all Epson XP-530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
2 Gently shake the Black (BK) ink cartridge. Do not shake Photo Black (PBK) or other ink cartridges. 3 Unpack the ink cartridges. 4 Load paper See the online User's Guide for instructions on loading paper in the cassette 1 and rear paper slot, available paper types, sizes, loading capacity, and loading CD/DVD/Blu-ray™ discs (XP-630/ XP-830). XP-630/XP-830 Output tray Cassette 1 Cassette 2/front cover Caution: Do not touch the areas shown below. Doing so may prevent normal operation and printing. 4 Remove the cap from each ink cartridge. Store the caps in the included plastic bag. You can load the following paper sizes: • Cassette 1: 3.5 × 5-, 4 × 6-, or 5 × 7-inch photo paper • Cassette 2: Letter-size, A4-, legal-size, or 8 × 10-inch paper See the instructions below for loading paper. • Rear paper feed slot: One sheet at a time (XP-830) XP-530 Output tray Cassette/front cover Note: Save the caps and use them to recap the ink cartridges after removing them for storage or disposal. 5 Insert the cartridges at an angle in the holder for each color. Press each cartridge down until it clicks. You can load the following paper sizes: 3.5 × 5-, 5 × 7-, 8 × 10inch, letter-size, A4-, or legal-size. 1 Lower the front cover (if it's not open already) and pull on the front cover to pull out the paper cassette. 6 Lower the scanner unit. 2 Slide the side edge guides outward and set the front edge guide to the paper size you are using. 7 The printer starts charging the ink. Ink charging takes approximately 7 minutes. When you see a completion message on the printer's LCD screen, charging is complete. Caution: Don't turn off the printer or raise the scanner unit while the printer is charging or you'll waste ink. Note: • The printer is designed for use with Epson® cartridges only, not third-party cartridges or ink. • The cartridges included with the printer are designed for printer set up and not for resale. After some ink is used for charging, the rest is available for printing. 3 Insert the paper with the glossy or printable side facedown. Note: Make sure the paper is loaded against the front edge guide and not sticking out from the end of the cassette.