Epson XP-830 User Manual - Page 3

Connect the fax line (XP-830), Install software, Mobile printing, Wired network connection XP-830 - support

Page 3 highlights

4 Slide the side edge guides against the paper, but not too tight. Make sure the paper is under the tabs on the side edge guides. 5 Keep the cassette flat as you insert it all the way. 6 Install software Note: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is required to obtain the product software. 1 Make sure the product is NOT CONNECTED to your computer. 6 XP-530/XP-630: Pull out the output tray until it stops. XP-830: The output tray is automatically ejected when you print. When you finish printing, press to close the tray. 7 Select the paper settings on the product's control panel, if prompted. 5 Connect the fax line (XP-830) Connect the phone cord to a telephone wall jack and to the LINE port on your product. See the online User's Guide for more information. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. 2 Insert the product CD or download and run your product's software package: XP-530: epson.com/support/xp530 (U.S.) or epson.ca/support/xp530 (Canada) XP-630: epson.com/support/xp630 (U.S.) or epson.ca/support/xp630 (Canada) XP-830: epson.com/support/xp830 (U.S.) or epson.ca/support/xp830 (Canada) 3 Follow the instructions on the screen to run the setup program. OS X: Make sure you install Software Updater to receive firmware and software updates for your product. 4 When you see the Select Your Connection screen, select one of the following: • Wireless connection In most cases, the software installer automatically attempts to set up your wireless connection. If setup was unsuccessful, you will be prompted to set up your wireless connection manually. Make sure you know your network name (SSID) and password. • Direct USB connection Make sure you have a USB cable (not included). • Wired network connection (XP-830) Make sure you have an Ethernet cable (not included). 5 When software installation is complete, restart your computer. Mobile printing Connect wirelessly from your tablet, smartphone, or computer. Print documents and photos from across the room or around the world. See your Quick Guide or visit epson.com/solutionsfinder.

  • 1
  • 2
  • 3
  • 4

6
Install software
Note:
If your computer does not have a CD/DVD drive or you are
using a Mac, an Internet connection is required to obtain the product
software.
1
Make sure the product is
NOT CONNECTED
to your
computer.
Windows
®
:
If you see a Found New Hardware screen, click
Cancel
and disconnect the USB cable.
2
I
nsert the product CD or download and run your product’s
software package:
XP-530:
epson.com/support/xp530
(U.S.) or
epson.ca/support/xp530
(Canada)
XP-630:
epson.com/support/xp630
(U.S.) or
epson.ca/support/xp630
(Canada)
XP-830:
epson.com/support/xp830
(U.S.) or
epson.ca/support/xp830
(Canada)
3
Follow the instructions on the screen to run the setup
program.
OS X:
Make sure you install Software Updater to receive
firmware and software updates for your product.
4
When you see the Select Your Connection screen, select
one of the following:
• Wireless connection
In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
was unsuccessful, you will be prompted to set up your
wireless connection manually. Make sure you know
your network name (SSID) and password.
• Direct USB connection
Make sure you have a USB cable (not included).
Wired network connection (XP-830)
Make sure you have an Ethernet cable (not included).
5
When software installation is complete, restart your
computer.
Mobile printing
Connect wirelessly from your tablet, smartphone, or
computer. Print documents and photos from across the
room or around the world. See your
Quick Guide
or visit
epson.com/solutionsfinder
.
4
Slide the side edge guides against the paper, but not too
tight. Make sure the paper is under the tabs on the side
edge guides.
5
Keep the cassette flat as you insert it all the way.
6
XP-530/XP-630: Pull out the output tray until it stops.
XP-830: The output tray is automatically ejected when you
print. When you finish printing, press
to close the tray.
7
Select the paper settings on the product’s control panel, if
prompted.
5
Connect the fax line (XP-830)
Connect the phone cord to a telephone wall jack and to the
LINE
port on your product. See the online
User’s Guide
for
more information.