Epson XP-8700 Start Here - Installation Guide - Page 2

3 Turn on and configure 1 Turn on the product, then adjust the control panel. 4 Insert the cartridges at an angle in the holder for each color. Press each cartridge down until it clicks. 2 Select your language on the LCD screen. Note: • You can change this setting later using the product's control panel. For more information, see the online User's Guide. • If an error message appears, turn off the product and check that no protective material has been left inside the product. 4 Install ink cartridges Caution: Keep the ink cartridges out the reach of children and do not drink the ink. Note: The included initial cartridges are designed for reliable printer setup and cannot be used as replacement cartridges or resold. After setup, the remaining ink is available for printing. 1 Lift up the scanner unit. Caution: Do not touch the flat, white cable or the print head path. 2 Unpack the ink cartridges. Caution: • Do not shake the ink cartridges. • Do not touch the areas shown below. Doing so may prevent normal operation and printing. 3 Remove the cap from each ink cartridge. Store the caps in the included plastic bag. Note: Save the caps and use them to recap the ink cartridges after removing them for storage or disposal. 5 Lower the scanner unit. 6 Select Installed. Ink charging takes approximately 10 minutes. When you see a completion message on the printer's LCD screen, charging is complete. Caution: Don't turn off the printer or raise the scanner unit while the printer is charging or you'll waste ink. Note: As part of setup, your product's serial number will be sent to a secure Epson server so that you can be eligible to participate in programs we may offer from time to time, including the Epson ink replenishment program. You will have a separate opportunity to consent to participating in such programs. 7 Follow the on-screen instructions to adjust the print quality of your product. Note: • You need to load paper before you can adjust the print quality. See the "Load paper" section for details. • Select Adjust Later if you want to adjust the print quality later. For more information, see the online User's Guide. 5 Load paper See the instructions below for loading paper in cassettes 1 and 2. Note: See the online User's Guide for a complete list of compatible paper types, sizes, and capacities, and instructions on loading paper in the rear paper feed slot and printing on CD/DVD/Blu-ray Discs™. Cassette 1 Output tray Cassette 2/ front cover Epson paper sizes 4" × 6", 5" × 7" 8" × 10", Letter, A4, Legal Cassette 1 • Cassette 2 • •