Esoteric G-05 Brochure EN - Page 3

Esoteric Company

Page 3 highlights

Esoteric-HCLD Output Buffer Circuit The G-05 is equipped with the highly acclaimed "Esoteric-HCLD" output buffer amplifier circuit found in the Grandioso C1X preamplifier. It takes advantage of its powerful current transfer capability and 180MHz wide frequency response to deliver pure 10MHz sine wave clock signal to connected digital players. Equipped with Four 10 MHz Clock Outputs Four 10 MHz sine wave clock outputs are provided to supply clocks to up to four digital devices. Custom Designed Coaxial Cables with MIL-standard SMA connectors Special custom coaxial cables, carefully selected for sound quality, are used for the critical wiring inside the G-05. The connectors are gold-plated SMA connectors that comply with MIL standards. The output connectors are gold-plated BNC connectors with precisely matched impedance = 50Ω to increase transmission reliability and reduce loss. Unique Chassis Construction The chassis construction is also specially designed for vibration-sensitive master clocks. The front and side panels are made of heavy-duty, thick-walled aluminum to suppress external vibrations. The Master Sound Discrete Clock module inside the chassis is freely mounted and grounded by its own weight without the use of mounting screws. The isolation feet, machined from steel and supported at three points, use a special mounting method that uses the weight of the chassis to connect to the bottom plate. By eliminating as many screws as possible for mounting the clock module and isolation feet, and by avoiding the stress concentration caused by screwing these vibration-sensitive components together, a natural vibration damping effect can be achieved, resulting in superior sound quality. In addition, the top plate has a semi-floating structure that is not fixed with screws, resulting in an open sound. G-05 Master Clock Generator Clock Output Frequency: 10MHz Frequency Precision: Within ± 0.01ppm (when shipped new) Connectors: BNC x 4 Output Level: Sine wave 0.5 ±0.1Vrms / 50Ω Power: 120V AC 60Hz, 220 -240V AC 50/60Hz Power Consumption: 10W (when stable) Overall Dimensions (W×H×D): 380 x 128 x 350 mm (include protrusions) Weight: 10kg l This product is available in two different power supply variations as shown in the Specifiations section.. Make sure that the voltage shown on the rear panel matches the AC line voltage in your area. l The shape of the AC inlet and plug of the supplied power cord depends on the voltage rating and destination country. Please note that not all models are available in every country. Design and specifications subject to change without notice. ©2023 Esoteric Company. All Rights Reserved. All text, images, graphics and other materials on this brochure are subject to the copyright and other intellectual property rights of Esoteric Company. These materials shall not directly or indirectly be published, reproduced, modified or distributed in any medium. Esoteric is a trademark of TEAC Corporation, registered in the U.S. and other countries. Grandioso is a trademark of TEAC Corporation. All other brand or product names are trademarks or registered trademarks of their respective holders. Authorized Dealer ESOTERIC COMPANY 1-47, Ochiai, Tama-shi, Tokyo Japan 206-8530 https://www.esoteric.jp/en Printed in Japan 0723WEB • TECD-0352

  • 1
  • 2
  • 3

Clock Output Frequency: 10MHz
Frequency Precision:
Within ±0.01ppm
(when shipped new)
Connectors:
BNC x 4
Output Level:
Sine wave
0.5 ±0.1Vrms / 50Ω
Power:
120V AC 60Hz,
220 -240V AC 50/60Hz
Power Consumption:
10W
(when stable)
Overall Dimensions
(W×H×D):
380 x 128 x 350mm
(include protrusions)
Weight:
10kg
G-05
Master Clock Generator
Printed in Japan 0723WEB
TECD-0352
ESOTERIC COMPANY
1-47, Ochiai, Tama-shi, Tokyo Japan 206-8530
Please note that not all models are available in every country. Design and specifications subject to change without notice.
©2023 Esoteric Company. All Rights Reserved. All text, images, graphics and other materials on this brochure are subject to the copyright and other intellectual property rights of Esoteric Company.
These materials shall not directly or indirectly be published, reproduced, modified or distributed in any medium. Esoteric is a trademark of TEAC Corporation, registered in the U.S. and other
countries. Grandioso is a trademark of TEAC Corporation. All other brand or product names are trademarks or registered trademarks of their respective holders.
l
This product is available in two different power supply variations as shown in the Specifiations section.. Make sure that the voltage shown on the rear panel matches the AC line voltage in your area.
l
The shape of the AC inlet and plug of the supplied power cord depends on the voltage rating and destination country.
Authorized Dealer
Esoteric-HCLD Output Buffer Circuit
The G-05 is equipped with the highly acclaimed “Esoteric-HCLD” output buffer amplifier circuit
found in the Grandioso C1X preamplifier. It takes advantage of its powerful current transfer
capability and 180MHz wide frequency response to deliver pure 10MHz sine wave clock signal
to connected digital players.
Equipped with Four 10 MHz Clock Outputs
Four 10 MHz sine wave clock outputs are provided to supply clocks to up to four digital devices.
Custom Designed Coaxial Cables with MIL-standard SMA connectors
Special custom coaxial cables, carefully selected for sound quality, are used for the critical
wiring inside the G-05. The connectors are gold-plated SMA connectors that comply with MIL
standards. The output connectors are gold-plated BNC connectors with precisely matched
impedance = 50Ω to increase transmission reliability and reduce loss.
Unique Chassis Construction
The chassis construction is also specially designed for vibration-sensitive master clocks. The
front and side panels are made of heavy-duty, thick-walled aluminum to suppress external
vibrations. The Master Sound Discrete Clock module inside the chassis is freely mounted and
grounded by its own weight without the use of mounting screws. The isolation feet, machined
from steel and supported at three points, use a special mounting method that uses the weight
of the chassis to connect to the bottom plate. By eliminating as many screws as possible for
mounting the clock module and isolation feet, and by avoiding the stress concentration caused
by screwing these vibration-sensitive components together, a natural vibration damping effect
can be achieved, resulting in superior sound quality. In addition, the top plate has a semi-floating
structure that is not fixed with screws, resulting in an open sound.