Esoteric Grandioso D1X Owners Manual EN FR SP - Page 19
Restoring factory settings, Troubleshooting, Turn the units off. - review
View all Esoteric Grandioso D1X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English Restoring factory settings Troubleshooting If you experience a problem with this product, please take a moment to review the following information before requesting service. Moreover, be aware that the problem might be caused by something other than this product. Please also check the operation of the connected units. If this product still does not operate correctly, contact the retailer where you purchased it. Settings are retained even if the power plug is disconnected. Follow these procedures to restore the factory default settings and erase all changes in memory. oo If the left and right channel units are linked, conducting this oper- ation on the left channel unit will also set the right channel unit to the same settings. If the left and right channel units are not linked, conduct the following procedures for each unit separately. 1 Turn the units off. If the power is on, press the POWER button and wait at least 30 seconds before proceeding. The Grandioso D1X does not turn on. ee Confirm that the power cords are securely connected to the inlets on the backs of the units and to the power outlets. ee Confirm that power is being supplied to the outlets to which the power cords are connected by, for example, connecting other devices to them. One or both units automatically turn off. ee This is because the automatic power saving function turned the unit(s) off. Press the POWER button on a unit to turn it on. Change the automatic power saving setting(s) if necessary (page 15). 2 Press the POWER button while pressing and holding the MENU button. When "Setup CLR" (settings cleared) appears on the display, release the MENU button. No sound is output from the speakers. The sound is distorted. ee Turn the power off and check the connections with the digital audio source device, the amp and the speakers (page 8). ee Change the input setting to the connector that is being used for input (page 12). ee Set this product's analog output (AOUT) setting according to the amp connection (page 15). ee Adjust the volume of the amplifier and other devices. No sampling frequency for the input signal is shown on the display. ee Turn the device that is connected to the selected input connector on. ee Confirm that the device is properly connected to the selected input connector. 19