Esoteric Grandioso D1X Firmware Update Manual - Page 1

Grandioso D1X Firmware update manual Model covered Grandioso D1X Equipment used Windows computer (with built-in USB 2.0 port) Micro USB cable oo Cables designed only for charging cannot be used. Always use a micro USB cable that supports data transmission. Supported operating systems Windows 8 (32/64-bit) Windows 8.1 (32/64-bit) Windows 10 (32/64-bit) (as of February, 2020) 1. Preparation A micro USB cable is necessary to update the firmware. Use a commercially-available micro USB cable. Download the DFU driver and updaters to any location on the computer from the following download link. oo Double-click the downloaded files to decompress them. https://www.esoteric.jp/en/product/d1x/download DFU driver oo Win_DFU_driver.exe Updaters oo D1X_IFvxxx_updater.exe oo MQA_vxxxxxx_updater.exe 2. Install the DFU driver After installing this on the computer once, installing it again will not be necessary. Proceed to "3. Update the I/F firmware" 1 Double-click Win_DFU_driver.exe. 2 When "Press any key to continue..." appears, press the Enter key. Display example * DFU driver for "Windows10 32bit" will be installed. Press any key to continue... NOTE If a "User Account Control" pop-up message appears during installation, click "Yes". 3 When the Device Driver Installation Wizard appears, click "Next". IMPORTANT NOTICE Different firmware update programs are made for every model. Execution of a firmware update program for a different model will make the Grandioso D1X unusable. 4 Click "Finish". NOTE The screens used in these instructions are from Windows 10. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other company names and product names in this document are the trademarks or registered trademarks of their respective owners. 1