Esoteric Grandioso K1X Installation guide for the ASIO USB DRIVER - Page 4

Setting the transfer mode With the K-01XD, K-03XD and other units that support Bulk Pet, the transfer mode can be set to Isochronous or Bulk Pet. One of the four Bulk Pet modes that balance the processing loads of the Host CPU and Device CPU differently can be selected, allowing the best audio quality to be chosen according to the computer being used and user preference. NOTE oo When this unit is first connected to a computer USB port, the transmission mode is set to Isochronous. oo Change settings when playback is stopped. Open the ESOTERIC ASIO USB DRIVER Control Panel from ESOTERIC HR Audio Player, and change the transmission mode 1 Launch ESOTERIC HR Audio Player. The two ways to change the transmission mode are as follows. Open the ESOTERIC ASIO USB DRIVER Control Panel, and change the transmission mode After the ESOTERIC ASIO USB DRIVER is installed, the following icon will appear in the Windows Control Panel. Double click this icon to open the ESOTERIC ASIO USB DRIVER Control Panel where you can select the desired transmission mode. 2 Select "Control Panel" from the "Configure" menu to open the ESOTERIC ASIO USB AUDIO Control Panel. 3 Select the desired transmission mode (Mode). 4