Eufy 720p Video Baby Monitor Baby_Monitor_Firmware_Upgrade_Manual New - Page 2

1) Connect the camera to your computer via your data cable. You will see a hard drive named "SN93700BU" on your desktop. 2) Open the "SN93700BU" hard drive and transfer the downloaded files named Camera.bin to the "SN93700BU" hard drive. The transmission process takes about 20-30s. 3) After the file transfer is completed, the camera will automatically restart. If the camera restarts, this indicates that Camera.bin file transfer was successful. STEP6 Camera Upgrade verification You can check that your camera has been upgraded to the latest version by going to "..." and then "Connect with Us" on the monitor menu. Make sure that the monitor's version number is consistent with the version you downloaded. 【For Windows】 STEP1 Download the latest firmware Please follow the link below to find the latest available firmware version: SpaceView(T8300): https://us.eufy.com/products/t83001d2?ref=navimenu_3_img SpaceView Pro(E8312): https://us.eufy.com/products/E83121D1 T8321: https://us.eufy.com/products/t83211d1 STEP2 Unzip the folder Unzip the folder and you'll find two files named Camera_VXXX.bin and Monitor_VXXX.bin. The name may change for different product and versions. STEP3 Upgrade the monitor 1) Connect the monitor to your computer via the data cable (If you don't have a data transfer cable, please contact eufy customer support). There will be a hard drive named "SN93701PU" displayed on your desktop.