Eufy 720p Video Baby Monitor 720p_Video_Baby_Monitor_manual_us - Page 4

Charge the Camera 1. Connect one end of the micro USB cable to the baby camera, and the other end to the power adapter (5V 1A). 2. Plug the power adapter into a power outlet. 5V/1A The new baby monitor and camera will set up automatically. You are all set to use the products after the monitor and camera are fully charged. ADDING A NEW BABY CAMERA TO THE BABY MONITOR The baby camera and baby monitor are paired and ready to use right out of the box. Refer to the following steps when adding extra baby cameras or after resetting a baby camera. 1. Enter menu settings, go to Camera -> Add Camera, then follow the onscreen instructions to start the pairing. 4 23 cP 06 : 12 AM Add Camera Delete Camera Cycle Cameras Camera Settings 60 Secs Scanning for new camera 1Secs Push the button on the camera to pair. 2. Press and hold the pairing button on the rear of the camera for 1 second until a notification prompt is heard. 04 EN 3. Check the firmware version of the monitor (see image below) to make sure your baby monitor and camera are running the same, latest firmware version. 4 06 : 12 AM Night Vision Mode Time Set Sleep Mode Anti-Screen Flicker Language Default Settings Temperature Unit Connect with Us https://www.eufylife.com United States +1 (800) 988 7973 United Kingdom +44 (0) 1604 936 200 Germany +49 (0) 69 9579 7960 Japan +81 03 4455 7823 [email protected] Monitor: v x.x.x Camera: v x.x.x SN: T8300E0A18370E72 To check whether it is the latest version: 1 Visit the website below: https://www.eufylife.com/support/5505/spaceview-baby-monitor 2 If the firmware version is lower than the version shown online (highlighted in green), click the firmware version to download. The downloaded file includes firmware for both T8300 and T8321 models, make sure you use the T8321 firmware. 3 Follow the steps in the "eufy Security Software Upgrade Guide" video or Firmware Upgrade Manual to complete firmware upgrade. Note: ● • • The eufy Security Spaceview baby camera can be added to the monitor. Before adding the camera, make sure SpaceView baby camera is running the same, latest version with the monitor's. Chrome OS is not supported for firmware upgrade. Before you upgrade firmware, use the provided micro USB cable (1m) to connect the device needed to your computer. USING THE BABY MONITOR When 2 or more cameras are added to the monitor, you can manually switch among cameras by pressing the monitor's OK button. Once the camera switch is completed, the icon of the selected camera will appear on the corner of the baby monitor. You can also select the "Cycle Camera" option. The screen cycles through the list of connected baby cameras according to the preset intervals. Note: The monitor will emit a loud noise if placed too close to the camera. This is normal and is resolved once the camera is moved away from the monitor. EN 05