Eufy RoboVac 30C Max RoboVac 30C Max_EN_Quick Start Guide - Page 1

Eufy RoboVac 30C Max Manual

Page 1 highlights

Quick Start Guide Using Your RoboVac Important Tips When using for the first time, follow RoboVac to observe and resolve any problems that may occur. Remove the sticker next to the power switch, and the foam blocks beside the bumper before use. a b c If you cannot remove the objects, check whether RoboVac can return to the Charging Base normally; if not, contact eufy customer service for help. - Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return. - When the Charging Base is connected to AC power, the LED indicator on the Charging Base is SOLID WHITE. Fully charge RoboVac before use. The LED indicator on RoboVac breathes orange while charging, and is solid blue when fully charged. d e f Remove power cords and small objects from the floor that may entangle RoboVac. You can use the supplied cable ties to organize your wires and power cords. Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very T - Install the can easily Charging access. It iBsarseecdoinmaarmkleo-nccadteoidolnototrhpealdat cReroutbhogeVsacor high-pile rugs thicker than 1.02 in/26 mm as they may cause RoboVac to Charging Base against a mwaall,lafundnocntaiohnar.d-level surface rather than on rugs or carpets. - Always keep the CharginKg Beaespe pRluoggbeod Vin,aocthearwwisaey from spaces close to 2.87 in/73 mm to prevent RoboVac from getting RoboVac will not automastitcualclykr.etIufrnnteocite. ssary, place physical barriers or Boundary Strips to block off the problem areas. Keep RoboVac away from wet areas. RoboVac may climb on top of objects less than 0.63 in/16 mm in height. Remove these objects if possible. To keep RoboVac away from any area or item you do not want RoboVac to clean, apply the Boundary Strip(s) on the floor with the supplied adhesive tape to create a virtual barrier. Make sure the strips are placed FLAT on the floor. Download the EufyHome app and follow the instructions in the app to complete the Wi-Fi connection. Then you can control RoboVac via this app. Refer to the Owner's Manual for details. EufyHome EufyHome 01 1 2 Place physical barriers or Boundary Strips in front of fireplaces and areas that may cause damage to RoboVac if entered. 51005001751 V01 02

  • 1

02
01
Using Your RoboVac
Important Tips
When using for the first time, follow RoboVac to observe and resolve any problems that may occur.
a
b
c
d
e
f
Remove power cords and small objects from the floor that may entangle RoboVac. You can
use the supplied cable ties to organize your wires and power cords.
Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very
dark-colored rugs or high-pile rugs thicker than 1.02 in/26 mm as they may cause RoboVac to
malfunction.
Keep RoboVac away from spaces close to 2.87 in/73 mm to prevent RoboVac from getting
stuck. If necessary, place physical barriers or Boundary Strips to block off the problem areas.
Keep RoboVac away from wet areas.
RoboVac may climb on top of objects less than 0.63 in/16 mm in height. Remove these
objects if possible.
To keep RoboVac away from any area or item you do not want RoboVac to clean, apply the
Boundary Strip(s) on the floor with the supplied adhesive tape to create a virtual barrier. Make
sure the strips are placed FLAT on the floor.
1
2
Place physical barriers or Boundary Strips in front of fireplaces and areas that may cause
damage to RoboVac if entered.
51005001751
V01
Quick Start Guide
Download the EufyHome app and follow
the instructions in the app to complete the
Wi-Fi connection. Then you can control
RoboVac via this app. Refer to the Owner’s
Manual for details.
Fully charge RoboVac before use. The
LED indicator on RoboVac breathes
orange while charging, and is solid
blue when fully charged.
- Always keep the Charging Base plugged in, otherwise
RoboVac will not automatically return.
- When the Charging Base is connected to AC power, the
LED indicator on the Charging Base is SOLID WHITE.
If you cannot remove the
objects, check whether
RoboVac can return to the
Charging Base normally; if
not, contact eufy customer
service for help.
Remove the sticker next
to the power switch, and
the foam blocks beside the
bumper before use.
EufyHome
EufyHome