Eufy WetVac W31 WetVac W31_EN/ES/KR/CN/AR_Manual - Page 11

3. Clean the rolling brush with the supplied cleaning tool. Self-Cleaning and Self-Drying 1. After cleaning, place the vacuum onto the charging base. 2. Make sure the battery level is high and there is enough water in the clean water tank. 3. Press the self-cleaning button. The vacuum will start self-cleaning and will self-dry automatically. It will take a while and you will hear a voice prompt when the self-drying is complete. 4. To reinstall the rolling brush, insert the end of the rolling brush into one side of the head, then fix the pin of the rolling brush into the hole on the other side of the head. Make sure the rolling brush is installed properly, otherwise it may be damaged during use. 5. Reinstall the rolling brush cover. click 4 5 1 Self-cleaning 3 2 Self-drying 4 18 EN EN 19