Eureka AirSpeed AS1051A Owner's Guide - Page 5
How to use accessories
View all Eureka AirSpeed AS1051A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ENGLISH How to use accessories Before using accessories CAUTION 1) Raise height adjustment to 'high carpet.' When using tools, always place handle in upright position to 2) Turn air path selector knob to 'tools.' raise vacuum to highest carpet setting. Brush roll will continue to turn when vacuum is turned on and handle is in upright WAND 1 2-Position wand Loosen wand and hose from back position. Do not tilt vacuum forward while using tools. To avoid damage, do not set vacuum on carpet, carpeted stairs, furniture or fringed rugs when using tools. of vacuum. • Push tool onto end of wand. • For short wand, push hose release button to remove wand. Attach tool to end of hose. TOOLS FLOORS Crevice tool Use for baseboards, corners and tight spaces. WAND 2 WAND 1 WAND 1 Dusting brush Use for furniture, drapes and vents. Turbo nozzle (with some models or available for purchase) Use for furniture and stairs. Bare floor nozzle and wand (with some models or available for purchase) Use for hard surfaces. Stair hose (with some models or available for purchase) Make sure vacuum is below you, pushed against the bottom step. 1) Attach stair hose to end of hose or wand. ! 2) Attach turbo nozzle to end of stair hose. NOTE: Hose length can be increased by releasing the hose from the hose retainer on back of unit. Reposition hose inside hose retainer after using accessories. Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com 3