Eureka AirSpeed Bagged AS1050A Owner's Guide - Page 4

Hose Air path selector knob How to identify parts of vacuum cleaner Handle SPECIAL FEATURES Available on some models Turbo nozzle (on some models) Bag indicator Turbo cover Dusting brush Bag compartment Exhaust/HEPA (located behind dust cup) Premotor filter Height adjustment knob Brush roll cover Turbo nozzle Power switch Handle release Upper hose retainer Upper cord retainer Crevice tool Carry handle and cord wrap Lower cord retainer (on carry handle) Wand Power cord Quick release cord wrap Lower hose retainer Base hose Maintenance schedule ! READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Power switch is marked I for ON-OFF. DISPOSABLE DUST BAG, Style AS - Replace when indicator turns orange 1 Disposable bag style AS Exhaust filter EF6 ( HEPA filter on some models) Premotor filter Replace bag when green indicator turns orange. Pull up latch to open cover. Fold over hygienic flap – and tuck in. 2 Lift handle — and remove disposable dust bag. Line up flat edge to install new bag. Close cover and snap to lock in place. Never use vacuum without dust bag in place PREMOTOR FILTER - Clean as needed to maintain suction Pull latch to release bottom lid. Remove filter; rinse and dry thoroughly. To reinstall filter, push curved edge under tabs. Close bottom lid until it clicks. EXHAUSNTevFeIrLTuEseRvEaFcu6u-mCwheitchkoufitltperrermeogtuolrarfillyt.eRr ienpplalacceeevery 6-12 months or when performance loss is noticeably declining U belt Brush roll Remove dust cup. Press down tab and Lift out filter and replace. Reinstall remove filter cover. cover and snap into place. BRUSH ROLL - Clean monthly U BELT - Replace worn, cut or out of shape belt 2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com