Eureka AirSpeed PRO ALL FLOORS Rewind Pet AS1061A Owner's Guide - Page 5

How to use accessories ENGLISH WAND 2 CAUTION When using tools, always place handle in upright position to raise vacuum to highest carpet setting. Brush roll will continue to turn when vacuum is turned on and handle is in upright position. Do not tilt vacuum forward while using tools. To avoid damage, do not set vacuum on carpet, carpeted stairs, furniture or fringed rugs when using tools. TOOLS Fig. 1 Before using accessories • Turn air path selector knob to 'tools' (Fig. 1). • Pull out cord to desired length. Do not pull past red line (Fig. 2). • Push cord into cord clip (Fig. 3). • To store, press switch to retract cord (Fig. 4). 2-Position wand WAND 1 (wand 2 on some models or available for purchase) • Loosen wand and hose from vacuum. Fig. 3 • Push tool onto end of wand (Fig. 5). • Short wand: Push hose release button to WAND remove wand 1. Attach tool to end of hose. 2 • Longer wand: Slide off wand 2 and turn over, then push opposite end onto wand 1. Dusting brush Use for furniture, drapes and vents. WAND 1 Crevice tool Use for baseboards, corners and tight spaces. Fig. 5 Turbo nozzle (on some models or available for purchase) Use for furniture and stairs. Stairs - make sure vacuum is below you, pushed against the bottom step. • Attach turbo nozzle to end of hose. NOTE: Hose length can be increased by releasing the hose from the hose retainer on back of unit. Reposition hose inside hose retainer after using accessories. Eureka Customer Service HELPLINE 1-800-282-2886 WAND 1 WAND 1 WAND 2 FLOORS Fig. 2 Fig. 4 Wand 1 Wand 2 (on some models) www.eureka.com 3