Eureka AirSpeed Rewind AS1049A Owner's Guide - Page 4

How to identify parts of vacuum cleaner Handle SPECIAL FEATURES Available on some models Air path selector knob Power cord Cord reel Turbo nozzle (on some models) Dust cup release Filter and screen (located inside dust cup) Dust cup Exhaust/HEPA filter compartment (located behind dust cup) Height adjustment knob Brush roll cover Turbo nozzle WAND 2 Hose Wand 2 Turbo cover Crevice tool Dusting brush Cord rewind switch Power switch Handle release Cord clip Carry handle Wand Lower hose retainer Base hose Maintenance schedule Maintenance Schedule is also located on back side of dust cup. ! READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Power switch is marked I for On/Off. DUST CUP - Empty after each use Filter DCF21 Press lever to release bottom lid. Debris will empty. Close bottom lid until it clicks. FILTER DCF21 - Replace or clean regularly to maintain suction Empty cup. Pull back For quick clean, Grasp filter and twist to remove latch to lift off lid. tap filter. from lid. Shake dust from filter. Screen Exhaust filter EF6 ( HEPA filter on some models) U belt Remove screen. Rinse screen and dust cup. Dry thoroughly. Align tab with slot to Reinstall filter. Align lid reinstall screen. at front; press down until lid snaps into place. EXHAUST FILTER EF6 - Check filter regularly. Replace every 6-12 months or when performance loss is noticeably declining Brush roll Remove dust cup. Press down tab and Lift out filter and replace. Reinstall remove filter cover. cover and snap into place. BRUSH ROLL - Clean monthly U BELT - Replace worn, cut or out of shape belt 2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com