Eureka Endeavor NLS 5400A Quick Start Guide - Page 1

5400 Series QUICK START GUIDE Thank you for purchasing your new Eureka vacuum! Important instructions For easy assembly, please take a few moments to read this Quick Start Guide. If you have questions about your new vacuum, please contact our customer service helpline at 1-800-282-2886. We're here to help! www.eureka.com Helpline Hours: 8 a.m. to 7:30 p.m. (CST), Monday - Friday 10 a.m. to 6:30 p.m. (CST), Saturday - Sunday 1STEP What's in the carton OWNER'S GUIDE REGISTRATION 1 long screw SPECIAL FEATURES Available on some models Important safeguards Dusting brush Chamber 2STEP Vacuum cleaner Turbo nozzle Handle Extra belt Extension wand and crevice tool Hair Raiser self-cleaning brush Stair hose Easy assembly ! READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Assemble the vacuum cleaner before using. Use Phillips screw driver. Slide handle onto tool caddy. Fasten with one long screw. Place hose over hose hook on handle. Push accessory hose into base hose. Pull up cord and push into lower cord retainer. Push cord into upper cord retainer. Wrap cord. Place wand/crevice tool in holder on side of vacuum. Place dusting brush on back of handle. 3STEP Place dust cup on base and snap into place. Snap turbo nozzle into clip on front. Get ready to vacuum For accessories: Loosen lower end of hose from vacuum and attach tool. Step on power switch to turn on; step on again to turn off. Step on handle release to lower handle into position. If vacuum is hard to push, raise carpet setting. Lift latch to remove dust cup. Empty after each use. PROBLEM SOLVING Refer to Owner's Guide. MAINTENANCE SCHEDULE Refer to back of dust cup or Owner's Guide.