Eureka FilterAir 8871AZ Owner's Guide - Page 4

How to Identify Parts of Vacuum Cleaner Handle Turbo nozzle Dusting brush Hose hook Hose Filter cover, filter and screen (located inside dust cup) Headlight Height adjustment knob Edge cleaner windows ON (-) / OFF (O) power switch ON (-) / OFF (O) brush roll switch Dust cup HEPA filter compartment Check brush roll light Brush roll reset button Brush roll cover Tool caddy, carry handle & upper cord wrap Nested crevice tool & extension wand Quick release cord wrap Handle release Hose wand Power cord Hose retainer Filter Maintenance Schedule Maintenance Schedule is also located on back side of dust cup. ! Assemble the vacuum cleaner before using. Moving parts. Make sure ON/OFF switch is in OFF (O) position before plugging in power cord. DUST CUP - Empty after each use Filter cover Filter DCF21 Push lever to release bottom lid. Debris will empty. Close bottom lid until it clicks. FILTER DCF21 - Clean or replace regularly to maintain suction Empty cup. Pull back latch to lift off lid. Pull out filter cover, filter and screen. Rinse cover, filter and screen; dry thoroughly. Screen HEPA Filter HF10 Align tab on screen Reinstall filter cover, Align lid at front; press down with slot in cup. and filter. until lid snaps into place. LID WILL NOT CLOSE WITHOUT FILTER IN PLACE HEPA FILTER HF10 - Replace within 6 months Brush Roll Cogged Belt Lift latch to remove dust cup. 2 Eureka Customer Service HELPLINE 1-800-282-2886 Lay flat and unlock door. Replace filter. Replace door and lock. BRUSH ROLL - Clean monthly www.eureka.com