Eureka LightSpeed 4750A Owner's Guide - Page 4

PN81157 baggedOG.qxd:81157 English 3/4/09 9:49 AM Page 4 How to Identify Parts of Vacuum Cleaner Handle Hose Dust cup latch Bag view window Dust cup Disposible dust bag (inside dust cup) Stair carrying handle Headlight (available on some models) Brush roll cover Nested crevice tool & extension wand Pre-motor filter (behind dust cup) Power switch Handle release Belt view window Handle with Power Paw® (available on some models) Lower cord retainer Upper cord retainer Hose support Power cord Dusting brush Carrying handle & cord wrap Hose connector Bottom cord wrap Hose retainer Maintenance Information Maintenance information is also located on back side of dust cup lid. READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. ! Moving parts! Assemble the vacuum cleaner before using. Do not use the vacuum cleaner without disposable dust bag and motor filter in place. DISPOSABLE DUST BAG style PL - Check regularly; replace as needed Pull up latch and remove dust cup. Twist cover counterclockwise and lift off. Lift out old bag and discard. Disposable bag style PL Place new bag inside dust cup. Position holes in cardboard Line up dust cup cover; collar over posts in cup. twist clockwise to lock. PRE-MOTOR FILTER - clean or replace monthly Pre-motor filter Remove dust cup; take off Shake dust off filter; Reinstall filter and frame; frame and filter. rinse and dry thoroughly. replace dust cup. Brush Roll EXT-U Belt BRUSH ROLL - Clean Monthly EXT-U BELT - Replace a worn, cut or out of shape belt 2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com