Eureka Maxima 4704FRD Quick Start Guide - Page 1

PN81156_LightspeedQS.qxd:front englsh 11/16/08 3:53 PM Page 1 4700 Series QUICK START GUIDE Thank you for purchasing your new Eureka vacuum! Before returning, call Eureka Customer Service HELPLINE 1-800-282-2886 8 a.m. to 7:30 p.m. (CST), Monday - Friday 10 a.m. to 6:30 p.m. (CST), Saturday - Sunday www.eureka.com 1STEP What's in the carton OWNER'S GUIDE REGISTRATION Dusting Brush Hose Retainer Tool Caddy Important Safeguards Hose SPECIAL FEATURES Available on some models Stair Hose 2STEP Vacuum Base Dust Cup and Filter Handle Easy assembly Vacuum Back 2 Long and 5 Short Screws Extension Wand and Crevice Tool Handle with Power Paw® Power Paw® ! READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts. Assemble the vacuum cleaner before using. Slide vacuum back onto base. Fasten with one long screw. Use a phillips screw driver. Slide tool caddy onto back. Fasten with two short screws. Slide handle onto tool caddy. Fasten with one long screw. Attach hose to vacuum back. Fasten with two short screws. Attach hose retainer with one Pull up cord and push into short screw. Pull retainer out lower cord retainer. Wrap cord. to position hose. Place hose over hose hook on handle. Push end of hose into opening on vacuum base. 3STEP Place dust cup on base and snap into place. Place wand/crevice tool in holder on side of vacuum. Place dusting brush on back of handle. Get ready to vacuum Some models: Snap Power Paw® into clip on front. Adjust height for carpet or bare floor. Push cord into top cord retainer. Plug into outlet. Step on power switch to turn on; step on again to turn off. Step on handle release to lower handle into position. If vacuum is hard to push, raise carpet setting. Empty dust cup when debris For accessories: Loosen lower Some models: Use Power Paw® reaches line or after each use. end of hose and attach tool. for furniture or stairs. PROBLEM SOLVING Refer to Owner's Guide. MAINTENANCE SCHEDULE Refer to back of dust cup or Owner's Guide.