Eureka SuperLite 443B Owner's Guide - Page 12

ENGLISH Brushroll M Note: Turn off the power switch E and unplug the electrical cord K before inspecting brushroll. A Long hair, thread, string, etc. can wrap around the revolving brush- roll and result in reduced performance. To check brushroll for debris turn cleaner nozzle over and inspect for wrapped matter. Use scissors to cut debris from brushroll. How to Check for Blockages Note: Turn off switch and unplug the electrical cord before checking for blockages. If suction performance diminishes, check for blockages in suction path. Step 1: Remove dust cup G and set aside. Step 2: Inspect for blockages inside hole area M at base of body A opening. Use tool or coat hanger to remove blockage (Fig. 8). FIG. 8 Step 3: Reinstall dust cup G . Step 4: Flip vacuum over and inspect dirt channel in brushroll area. Open access door by pulling back on access door latch N and lifting up (Fig. 9), check for blockage. Remove any blockages with tool or coat hanger. Close access door. N PUSH TO OPEN FIG. 9 12