Fagor 24 Inch Refrigerator User's Manual - Page 8

8 6. Loosen screws used to hold the middle hinge and remove middle hinge. Then remove the lower door. 9. Place the refrigerator flat on the floor, remove adjustable feet and self-tapping screws. Remove the front foot fixed board and lower hinge part. 7. Place the lower door on a smooth surface facing upwards. Change the handle to the right side by following step 5 described in page 7. Remove the selftapping screws, detach the stop block and door holder. Washer ① Lower hinge part（right） ② Front foot fixed board ③ Adjustable bottom feet part ④ Self-t apping screws Note: The washer may stick to lower door. 10. Unscrew the lower hinge, change it to the opposite side and reattach and mount washer. 11. Change lower hinge part to the left side and front foot fixed board to the right side, then fasten with self-tapping screws. Finally install adjustable feet. Lower hinge part (left) ① Handle covers ② Special self-t apping screws ③ Handle ④ Screw hole covers ⑤ Door holder ⑥ Stop block ⑦ Self-t apping screws Turn the door holder 180° and then install it and the stop block on the opposite side with the self-tapping screws. 1 2 12. Remove the lower door by pulling down and align the lower hole site and upper hinge axis. Turn the middle hinge piece 180°, change the washer on the axis to the upper side, adjust the middle hinge to the appropriate position and then reinstall it. 8. Change the screw hole covers on the middle cover plate from left to right. Note: The washer may stick to lower door. Washer