Fantec QB-X8US3R Manual - Page 5

Striping is a method of concatenating multiple hard drives into one logical storage unit. It is the automated process of writing data across multiple drives simultaneously. Striping is used to increase the performance of disk reads. The multiple hard drives will write data in "column" effect. If one drive in a striped set fails, all of the data in the stripe set is lost. Note: The computer will detect 1 drive. HDD 1 HDD 2 HDD 3 HDD 4 HDD 5 HDD 6 HDD 7 HDD 8 HDD 1 3TB HDD 2 3TB HDD 3 3TB HDD 4 3TB HDD 5 3TB HDD 6 3TB HDD 7 3TB HDD 8 3TB 2x Raid 0 Striping, is the same like Raid 0 striping. Note: The computer will detect 2 drives. 24TB HDD 1 HDD 2 HDD 3 HDD 4 HDD 5 HDD 6 HDD 7 HDD 8 Layer 1 Layer 2 HDD 1 3TB Layer 1 HDD 2 3TB 12TB HDD 3 3TB HDD 4 3TB HDD 5 3TB Layer 2 HDD 6 3TB 12TB HDD 7 3TB HDD 8 3TB 7 Distributed parity requires all drives but one to be present to operate; drive failure requires replacement, but the array is not destroyed by a single drive failure. Upon drive failure, any subsequent reads can be calculated from the distributed parity such that the drive failure is masked from the end user.0 The array will have data loss in the event of a second drive failure and is vulnerable until the data that was on the failed drive is rebuilt onto a replacement drive. Note: The computer will detect 2 drives. HDD 1 HDD 2 HDD 3 HDD 4 HDD 5 HDD 6 HDD 7 HDD 8 Layer 1 Layer 2 HDD1 HDD2 HDD3 HDD4 HDD5 HDD6 HDD7 HDD8 3TB 3TB Layer 1 3TB 9TB 3TB 3TB 3TB Layer 2 3TB 9TB 3TB 8