Fantec SNT-BA3241-2 Datasheet - Page 1

BA-2231 BA-3241 User's Manual (IDE ATA133) Note! HDD connector (male) has to meet with the female connector on the PCB precisely Picture IDE HDD I IN IDE HDD * IDE ATA133 Interface * Adjustable screw [see picture A] The two screws on power inlet are adjustable. Adjust the screws left/right to meet the different HDD connector pitch. * LED Indicators LOCK 1. Power LED: Power on, LED indicates Green. 2. HDD ACCESS LED: Power on the system, the HDD LED will light on and that means your HDD is well installed. While reading or writing on each HDD,the LED is blinking while HDD accessing. 3. Fan Sensor LED (BA-3241) A When the fan is working, LED indicates "Green" color B When the fan is not working, LED is "OFF". C FAN SW design OPEN * Safety Lock a) Turn the key clockwise to horizontal way --- It is locked and do NOT try to press the push-button to take out the HDD.[see picture B] b) Turn the key vertically --- It is open and you are permitted to press the push-button to take out the HDD.[see picture C] * Installing [see picture D] l.Use TM#6*6 long screws to mount the drive in the drawer. (Note: Follow Position 1,2,3,4 to fix the screws) • 2.Use 3*4TM long screws to mount the Backplane in the PC or Server case. (r) 00000000.0j 0000000000 000 ===== 00 Picture A '.000000000 Picture B Picture D 3X41M TM6#x6