Fellowes 325Ci Manual - Page 3

Preventive Maintenance And Miscellaneous Troubleshooting - shredder c

Page 3 highlights

JAM PROOF SYSTEM OPERATION* Eliminates frustrating jams by preventing overloads and powering through misfed paper. 1 Advanced Jam Prevention- Electronically 2 3 measures paper thickness to prevent paper jams: Up to RED: Too many sheets have been inserted. Up to YELLOW: Productivity is optimized. Remove several sheets until indicator is below red. Continue 100% Jam Proof Shredding Up to GREEN: More sheets can be added. If a misfeed occurs: All indicators light up and shredder pauses for 3-6 seconds *100% Jam Proof when used in accordance with user manual Wait for flashing to stop after automatic correction is complete. Regular shredding will resume. If illuminates after paper has been reversed, press reverse and remove paper. Otherwise, regular shredding will resume. STRAIGHT FEED If Straight Feed indicator illuminates, remove papeArUTaOnd AUTO AUTO AUTO feed straight into shredder. AUTO AUTO SLEEP MODE AUTO AUTO AUTO SAFESENSE® TECHNOLOGY OPERATION WHEN IN SLEEP MODE 1 2 3 SET-UP AND TESTING 1 2 3 4 In sleep mode To get out of sleep mode or insert paper touch control panel Turn the shredder ON Touch test area and ( ) to activate SafeSense® look for the SafeSense® indicator to illuminate SafeSense® is active and working properly If hand is held on SafeSense® area more than 2 seconds Shredder will shut off BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING OILING SHREDDER All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and could ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin. FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE 1 2 3 *Apply oil across entry Shred one sheet Press and hold forward ( ) 2-3 seconds *Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250 PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHO15OTING • Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds (C-325Ci). • Empty wastebasket when bin full indicator lights up. • Shredder won't run if the door is open, or bin needs to be emptied. • Maintenance is an important part of protecting your investment. Don't forget our oil (35250) and shredder bags (36056). Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers. 2

  • 1
  • 2
  • 3
  • 4

Eliminates frustrating jams by preventing overloads and powering through misfed paper.
JAM PROOF SYSTEM OPERATION*
*100% Jam Proof when used in accordance with user manual
STRAIGHT FEED
PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING
• Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds (C-325Ci).
• Empty wastebasket when bin full indicator lights up.
• Shredder won’t run if the door is open, or bin needs to be emptied.
• Maintenance is an important part of protecting your investment. Don’t forget our oil (35250) and shredder bags (36056).
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
2
Advanced Jam Prevention- Electronically
measures paper thickness to prevent paper jams:
Remove several sheets until
indicator is below red.
Continue 100% Jam
Proof Shredding
If a misfeed
occurs:
If
illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
1
2
3
Up to RED: Too many
sheets have been inserted.
Up to GREEN: More sheets
can be added.
Up to YELLOW: Productivity
is optimized.
All indicators light up and
shredder pauses for 3-6 seconds
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING
All cross-cut shredders require oil for peak performance. If not oiled, a
machine may experience diminished sheet capacity, intrusive noise when
shredding and could ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty your waste bin.
OILING SHREDDER
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
2
Shred one sheet
3
Press and hold forward
(
) 2-3 seconds
1
*Apply oil across entry
3
4
SAFESENSE
®
TECHNOLOGY OPERATION
WHEN IN SLEEP MODE
SLEEP MODE
1
3
In sleep mode
To get out of sleep mode
touch control panel
If Straight Feed indicator
illuminates, remove paper and
feed straight into shredder.
insert paper
or
2
SET-UP AND TESTING
Turn the shredder ON
(
) to activate SafeSense
®
Touch test area and
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is active and
working properly
If hand is held on SafeSense
®
area more than 2 seconds
Shredder will shut off
1
2