Fellowes 62MC User Guide - Page 2

ENGLISH Model 62MC A. B. E. KEY A. Safety Lock F. Control Panel and LEDs C. F. To set lock slide 1. Reverse button down 2. ON/OFF (green) 3. Forward B. See safety instructions 4. Overheat (red) and C. Pull-out bin Remove paper (yellow) D. Casters 5. Bin open (yellow) E. Paper/card entry D. CAPABILITIES Will shred: Paper, staples and credit cards Will not shred: CD/DVDs, adhesive labels, continuous form paper, transparencies, newspaper, cardboard, paper clips, laminates, file folders, X-rays or plastic other than noted above Paper/card shred size: Micro-Cut 7/64 in. x 25/64 in. (3mm x 10mm) Maximum: Sheets per pass ...10* Cards per pass...1* Paper entry width 9 in. (223mm) *8.5"x11", 20lb., (75g) paper at 120V, 60Hz, 3.5Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Maximum recommended daily usage rates: 150 sheets per day; 10 credit cards 10 sheets per pass to avoid jams. IMPORTANT SAFETY INSTRUCTIONS - Read Before Using! 15 15 • Operation, maintenance, and service requirements are covered in the instruction manual. Read the entire instruction manual before operating shredders. • Keep away from children and pets. Keep hands away from paper entry. Always set to off or unplug when not in use. • Keep foreign objects - gloves, jewelry, clothing, hair, etc. - away from shredder openings. If object enters top opening, switch to Reverse ( ) to back out object. • Avoid touching exposed cutting blades under shredder head. • Shredder must be plugged into a properly grounded wall outlet or socket of the voltage and amperage designated on the label. The grounded outlet or socket must be installed near the equipment and easily accessible. Energy converters, transformers, or extension cords should not be used with this product. • FIRE HAZARD - Do NOT shred greeting cards with sound chips or batteries. 15 • Never use aerosol products, petroleum based lubricants or other flammable products on or near shredder. Do not use canned air on shredder. • Do not use if damaged or defective. Do not disassemble shredder. Do not place near or over heat source or water. • For indoor use only. • Unplug shredder before cleaning or servicing. BASIC SHREDDING OPERATION PAPER/CARD 1 2 3 Continuous operation: Up to 7-minutes maximum NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond 7-minutes will trigger 60-minute cool down period. Plug in and set to Auto-On ( ) Feed paper/card straight into paper entry and release When finished shredding, set to Off ( ) Safety Lock prevents accidental operation. To set, wait for shredding to stop, set control switch to Off (O) position, then slide black button down. To unlock, slide black button up. For greater safety, always unplug shredder after use. 2