Fellowes AeraMax DB55 Manual - Page 3

SAFETY INSTRUCTIONS/WARNING WARNING: Follow the instructions in this manual to reduce the risk of electric shock, short circuit, and/or fire: • Do not repair or modify the unit unless specifically recommended in this manual. All • Do not use the unit near flammable gases. Do not use near cigarettes, incense, or repairs should be completed by a qualified technician. other spark-creating items. • Do not force the plug into an electrical outlet. • Unit will not remove carbon monoxide emitted from heating appliances or other • Do not alter the plug in any way. If the plug does not fit into the outlet, reverse the sources. plug. If it still does not fit, contact a qualified technician to install a proper outlet. • Do not block the intake or outlet vents. • Do not use if the power cord or plug is damaged or the connection to the wall outlet is loose. • Do not use near hot objects, such as a stove. Do not use where the unit may come • Use AC 100-240V only. into contact • Do not damage, break, forcefully bend, pull, twist, bundle, coat, pinch, or place heavy objects with steam. on the power cord. • Do not use the unit on its side. • Periodically remove dust from the power plug. This will reduce the chance that humidity • Keep away from products that generate oily residue, such as a deep fryer. will accumulate, which increases the risk of electric shock. • Do not use detergent to clean the unit. • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent • Do not operate without a filter. or similarly qualified persons in order to avoid a hazard • Do not wash and reuse the True HEPA Filter. • Remove the power plug from the outlet before cleaning the unit. When removing the power plug, grasp by holding the plug itself, never hold by the cord. • Remove the power plug from the outlet when the unit is not in use. • Do not handle the power plug with wet hands. • Do not run power cord under carpets or cover with throw rugs. • When moving machine, always lift using handle. • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and • Do not operate the unit when using indoor smoke-generating insecticides. knowledge if they have been given supervision or instruction concerning use of • Do not clean unit with benzene or paint thinner. Do not spray insecticides on the unit. • Do not use the unit where it is humid or where the unit may get wet, such as in a bathroom. • Do not insert fingers or foreign objects into the air intake or outlet. the appliance in a safe way an understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. SET-UP AND OPERATION NOTE: follow these instructions for best results Place unit at least ½ meter from the wall. Keep unit away from drafty areas. Keep curtains away from unit, as they may interfere with air intake/outlet. Place unit on a stable surface with plenty of air circulation. 1. Remove protective film from the control panel. 2. Pull out drawer. 3. Remove bag from filters. Place filters back in unit. 4. Insert Carbon Filter first and then True HEPA Filter. 5. Fully insert drawer into unit until click is heard. 6. Plug in the power cord to a wall outlet. 7. Turn unit on. Unit will beep. For approximately the first 4 minutes after turning the unit on, the indicators will flash while the unit measures air quality. FILTER REPLACEMENT: The replacement filter indicators will signal when to replace the True HEPA Filter and/ or Carbon Filter. The replacement period will vary depending on the hours of use and air quality. However, under normal usage, most True HEPA Filters need to be replaced annually, and Carbon Filters every three months. Do not wash and reuse the True HEPA or Carbon Filters-they will not work effectively. Only use Fellowes brand AeraMax™ replacement filters. WARNING: Before replacing any filters, make sure to remove the power plug from the wall outlet. FILTER INDICATOR RESET: 1. Be sure that the drawer is closed. 2. Turn on the unit. 3. Locate the filter replacement icon on the display panel. 4. Touch and hold the filter replacement icon for 3 seconds. HEPA Filter icon will flash amber. Touch filter icon area to alternate between HEPA and Carbon. 5. Once desired filter is illuminated, touch and hold for 3 seconds. A short beep will be heard and the light should turn off. Repeat process for each filter as needed. CARE AND MAINTENANCE CLEANING: Clean unit as necessary by wiping with a dry, soft cloth; for stubborn stains, use a warm, damp cloth. Do not use volatile fluids such as benzene, paint thinner, or scouring powder, as they may damage the unit surface. Keep the unit dry. TROUBLESHOOTING: Solutions to common problems Review this list before you call for service. This list covers problems that are not the result of defective materials or workmanship. PROBLEM: The unit leaves smoke and odors in the air. POSSIBLE SOLUTION: Make sure the sensor is not blocked or clogged. Move the unit closer to the offending odors. Replace the filters as needed. The unit seems to produce odors. Replace the filters as needed. The unit makes a faint ticking sound. The unit interferes with radio or television reception. This indicates that the PlasmaTRUE™ function is working. Because this unit radiates radio frequency energy, we suggest you try one or more of the following: - For better reception, adjust the television/radio antenna. - Move the unit away from the affected television/radio. - Plug the unit power cord into an outlet different from the television/radio power cord. The True HEPA and Carbon Filter indicators remain lit after replacing the True HEPA and/or Carbon Filter. Repeat filter light reset instructions from the Set-Up and Operation section. The PlasmaTRUE™ icon is not illuminated. The wrong filter replacement light was reset. Touch and hold PlasmaTRUE™ icon for five seconds until unit beeps. In the case of unintended filter reset, repeat the filter reset procedure from the Set-Up and Operation section within 5 minutes of unintended reset. The filter counter and indicator will return to the status previous to the reset. The display panel buttons will not work. Touch and hold the Night Mode/Child Lock icon for five seconds until it beeps. 3