Fellowes C-525C Manual - Page 2

English, Indicator Lights, Capabilities, Advanced Product Features - cross cut shredder

Page 2 highlights

R R R R RR ENGLRISH A. G. B. H. Model C-525/C-525C C. KEY R R R R D. A. Safety Flap H. CRontrol Panel and LEDs R R B. Paper entry R 1. ON/OFF R R C. Disconnect switch (opRen door) R 2. Reverse E. D. Door 3. Bin full E. Basket - paper (inside) 4. Door open F. Casters 5. Safety Flap Open G. See safety instructions 6. Low oil R 7. Auto oil complete F. R R R INDICATOR LIGHTS R R R RR Stops automRRatically when door is Stops auRtomRatically when bin is full. Stops auRtRomatically if too much StopRs auRtomatically OverloaRRd protection. Cutting shafts are if safety flap is Machine stops to cool automatically oiled Oil bRoRttle is empty opened. Symbols Empty bag when paper is inserted. opened. Symbols down- approx. 10-15 flash alternately bag full indicator Automatic reverse flash alternately minutes. Symbols lights up if paper jams flash alternately CAPABILITIES Will shred: Paper, credit cards, CD/DVDs, staples, paper clips, junkmail and 3.5" diskettes. Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper, cardboard, laminates, file folders, X-rays or plastic other than noted above. Paper shred size: Strip-Cut R...R.R.R 1/4 in. (6mm) Cross-Cut 3/16 in. x 1-1/2in. (4mm x 40mm) ADVANCED PRODUCT FEATURES Auto Oil™ Lubricates the cutters automatically to enhance performance and extend shredder life Maximum: Sheets per pass (Strip-Cut 41-50* Sheets per pass (Cross-Cut 28-34* Paper entry width 12 in. (305mm) *8.5 in. x 11 in., 20lb., (75g) paper at 120V, 60 Hz, 15Amps; heavier paper, humidity or other than rated voltage may reduce capacity. ReRcRommended maximum daily usage rates: 10,000 sheets per day. Sheets per pass: C-525: 41-50; C-525C: 28-34 *In order to perform at capacity, shredder must be plugged into a dedicated 20Amp, 120V outlet and auto oil system must be engaged. Sleep Mode RR Energy saving feature shuts down the shredder after 1 hour of inactivity RR IMPORTANT SAFETY INSTRUCTIONS - Read Before Using! • Keep away from children and pets. Keep hands away from • This shredder has a Disconnect Power Switch (C) in the door. The door paper entry. Always set to off or unplug when not in use. must be closed to operate shredder. In case of emergency, open door. • Keep foreign objects - gloves, jewelry, clothing, hair, This action will stop shredder immediately. etc. - away from shredder openings. If object enters top • Avoid touching exposed cutting blades under shredder head. opening, switch to Reverse (R) to back out object. 15 • Never use aerosol products, petroleum based lubricants or • Shredder must be plugged into a properly grounded wall outlet or socket of the voltage and amperage designated on the label. The other flammable products on or near shredder. Do not use grounded outlet or socket must be installed near the equipment and 15 canned air on shredder. easily accessible. Energy converters, transformers, or extension cords • Do not use if damaged or defective. Do not disassemble should not be used with this product. shredder. Do not place near or over heat source or water. • Do not operate the machine without the safety flap closed (A). 15 1

  • 1
  • 2
  • 3
  • 4

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• Keep away from children and pets. Keep hands away from
paper entry. Always set to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair,
etc. – away from shredder openings. If object enters top
opening, switch to Reverse (
R
) to back out object.
• Never use aerosol products, petroleum based lubricants or
other flammable products on or near shredder. Do not use
canned air on shredder.
• Do not use if damaged or defective. Do not disassemble
shredder. Do not place near or over heat source or water.
• This shredder has a Disconnect Power Switch (C) in the door. The door
must be closed to operate shredder. In case of emergency, open door.
This action will stop shredder immediately.
• Avoid touching exposed cutting blades under shredder head.
• Shredder must be plugged into a properly grounded wall outlet or
socket of the voltage and amperage designated on the label. The
grounded outlet or socket must be installed near the equipment and
easily accessible. Energy converters, transformers, or extension cords
should not be used with this product.
• Do not operate the machine without the safety flap closed (A).
Will shred:
Paper, credit cards, CD/DVDs, staples, paper clips, junkmail
and 3.5" diskettes.
Will not shred:
Adhesive labels, continuous form paper, transparencies,
newspaper, cardboard, laminates, file folders, X-rays or plastic other than
noted above.
Paper shred size:
Strip-Cut
...........................................................................
1/4 in. (6mm)
Cross-Cut
.........................................
3/16 in. x 1-1/2in. (4mm x 40mm)
Maximum:
Sheets per pass (Strip-Cut)
...........................................................
41-50*
Sheets per pass (Cross-Cut)
..........................................................
28-34*
Paper entry width
...........................................................
12 in. (305mm)
*8.5 in. x 11 in., 20lb., (75g) paper at 120V, 60 Hz, 15Amps; heavier
paper, humidity or other than rated voltage may reduce capacity.
Recommended maximum daily usage rates: 10,000 sheets per day. Sheets
per pass: C-525: 41-50; C-525C: 28-34
*In order to perform at capacity, shredder must be plugged into a
dedicated 20Amp, 120V outlet and auto oil system must be engaged.
H. Control Panel and LEDs
1. ON/OFF
R
2. Reverse
3. Bin full
4. Door open
5. Safety Flap Open
6. Low oil
7. Auto oil complete
A. Safety Flap
B. Paper entry
C. Disconnect switch (open door)
D.Door
E. Basket - paper (inside)
F. Casters
G. See safety instructions
1
ENGLISH
Model C-525/C-525C
KEY
INDICATOR LIGHTS
CAPABILITIES
ADVANCED PRODUCT FEATURES
Stops automatically
when door is
opened. Symbols
flash alternately
Stops automatically
when bin is full.
Empty bag when
bag full indicator
lights up
Stops automatically
if too much
paper is inserted.
Automatic reverse
if paper jams
Stops automatically
if safety flap is
opened. Symbols
flash alternately
Overload protection.
Machine stops to cool
down- approx. 10-15
minutes. Symbols
flash alternately
Cutting shafts are
automatically oiled
Oil bottle is empty
Sleep Mode
Energy saving feature shuts down
the shredder after 1 hour of inactivity
Auto Oil™
Lubricates the cutters automatically to enhance
performance and extend shredder life
R
A
.
B
.
G.
H.
F.
E.
D.
C.