Fender Acoustasonic Ultralight Stereo Owners Manual - Page 1

Fender Acoustasonic Ultralight Stereo Manual

Page 1 highlights

FENDER® ACOUSTASONIC™ ULTRALIGHT STEREO LOUDSPEAKER ENCLOSURE Your new Acoustasonic™ Ultralight stereo loudspeaker features two 8" (20.3 cm) Eminence® woofers with neodymium magnets and two 1" (2.5 cm) soft dome tweeters with neodymium magnets, handling up to 250 watts of power. Designed to complement the Fender® Acoustasonic™ Ultralight amplifier, the Ultralight speaker cabinet is constructed from quality Italian poplar plywood. Please read these instructions and your amplifier manual before making connections. Ultralight Connections To connect the Acoustasonic™ Ultralight speaker to an Ultralight amplifier, use the Speakon® cable included with the amplifier. Rotate the Speakon® connector to align it with the input slots, then fully insert the connector. Rotate the connector clockwise until it locks into place. Disconnecting Slide the locking tab back on the connector while rotating the connector counter-clockwise. Pull the connector out from the input socket. Non-Speakon® Connections If your amplifier does not have a Speakon® speaker output, you will need the appropriate speaker cable or adapter to connect the Acoustasonic™ Ultralight loudspeaker. Speaker cable should be 4-conductor, 18-gauge minimum with the Speakon® connector wired: 1+ pin = Right [+] 1- pin = Right [-] 2+ pin = Left [+] 2- pin = Left [-] SPECIFICATIONS PART NUMBER 2271700000 SPEAKERS Two 8" (20.3 cm) drivers with 2" (5.1 cm) voice coils and Neodymium magnets; Two 1" (2.5 cm) soft dome tweeters with Neodymium magnets CROSSOVER 3kHz, 12dB/octave low-pass filter, 18dB/octave high-pass filter, using metallized polyester film capacitors and low loss inductors CABINET 5/8" (1.6 cm) Italian poplar plywood SENSITIVITY 91 dB, 1 watt - 1 meter POWER HANDLING 125 watts per side IMPEDANCE 4 ohms per side CONNECTIONS 4-Pole Speakon® connector ENCLOSURE VOLUME VB = 0.43 ft3 (12 L) per side DIMENSIONS Height: Width: Depth: 15 in (38.1 cm) 20.25 in (51.4 cm) 10 in (25.4 cm) WEIGHT 22 lb (10.0 kg) Product specifications are subject to change without notice. A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORPORATION CORONA, CALIFORNIA USA Fender® and Acoustasonic™ are trademarks of FMIC. Other trademarks are property of their respective owners. © 2005 FMIC. All rights reserved. P/N 069327 REV A

  • 1

Your new Acoustasonic™ Ultralight stereo loudspeaker features two 8"
(20.3 cm) Eminence® woofers with neodymium magnets and two 1"
(2.5 cm) soft dome tweeters with neodymium magnets, handling
up to 250 watts of power. Designed to complement the Fender®
Acoustasonic™ Ultralight amplifier, the Ultralight speaker cabinet is
constructed from quality Italian poplar plywood. Please read these
instructions and your amplifier manual before making connections.
Ultralight Connections
To connect the Acoustasonic™
Ultralight speaker to an Ultralight
amplifier, use the Speakon® cable
included with the amplifier. Rotate
the Speakon® connector to align it
with the input slots, then fully insert
the connector.
Rotate the connector clockwise until it
locks into place.
Disconnecting
Slide the locking tab back on the
connector while rotating the connector
counter-clockwise. Pull the connector out
from the input socket.
Non-Speakon® Connections
If your amplifier does not have a
Speakon® speaker output, you will need
the appropriate speaker cable or adapter
to connect the Acoustasonic™ Ultralight
loudspeaker. Speaker cable should be
4-conductor, 18–gauge minimum with
the Speakon® connector wired:
1+ pin = Right [+]
1– pin = Right [–]
2+ pin = Left [+]
2– pin = Left [–]
SPECIFICATIONS
PART NUMBER
2271700000
SPEAKERS
Two 8" (20.3 cm) drivers with 2" (5.1 cm) voice coils
and Neodymium magnets;
Two 1" (2.5 cm) soft dome tweeters
with Neodymium magnets
CROSSOVER
3kHz, 12dB/octave low-pass filter, 18dB/octave high-pass
filter, using metallized polyester film capacitors and
low loss inductors
CABINET
5/8" (1.6 cm) Italian poplar plywood
SENSITIVITY
91 dB, 1 watt - 1 meter
POWER HANDLING
125 watts per side
IMPEDANCE
4 ohms per side
CONNECTIONS
4-Pole Speakon® connector
ENCLOSURE VOLUME
V
B
=
0.43 ft
3
(12 L) per side
DIMENSIONS
Height:
15 in
(38.1 cm)
Width:
20.25 in
(51.4 cm)
Depth:
10 in
(25.4 cm)
WEIGHT
22 lb
(10.0 kg)
Product specifications are subject to change without notice.
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORPORATION
CORONA, CALIFORNIA USA
Fender
®
and Acoustasonic™ are trademarks of FMIC.
Other trademarks are property of their respective owners.
© 2005 FMIC. All rights reserved.
P/N 069327 REV A
FENDER
®
ACOUSTASONIC
ULTRALIGHT STEREO LOUDSPEAKER ENCLOSURE