Fender Bandmaster Reverb Owner Manual - Page 5
Front, Panel, Functions
View all Fender Bandmaster Reverb manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
FRONT PANEL FUNCTIONS NORMAL CHANNEL INPUT JACKS Jack No. 1 for use when one instrument is used. Jack No. 2 for use with second instrument or equipment with high output level. BRIGHT SWITCH Adds brilliance to all notes, especially higher frequency notes. VOLUME CONTROL Volume setting from zero to full power output. TONE CONTROLS Treble Control-Regulates amount of high frequency response. Complemented by bright switch. Middle Control -Adds a rich tone and accents middle register. Bass Control -Regulates amount of bass response. VIBRATO CHANNEL INPUT JACKS Jack No. 1 for use when one instrument is used. Jack No. 2 for use with second instrument or equipment with high output level. BRIGHT SWITCH Adds brilliance to all notes, especially higher frequency notes. VOLUME CONTROL Volume setting from zero to full power output. TONE CONTROLS Treble Control-Regulates amount of high frequency response. Complemented by bright switch. Middle Control-Adds a rich tone and accents middle register. Bass Control -Regulates amount of bass response. REVERB CONTROL Reverb Control -Selects the amount of reverberation. VIBRATO CONTROLS Speed -Regulates the rapidity of the vibrato effect -variable from slow to extremely fast setting. Intensity Control -Increases or decreases the vibrato effect. MASTER VOLUME CONTROL DISTORTION SWITCH The Master Volume Control is equipped with a pushpull distortion switch. CLEANEST SOUND To get the cleanest possible sound, push the Master Volume Control knob in and turn it to "10." Adjust the VIBRATO channel volume to the desired sound level. DISTORTION CONTROL To get a distortion effect, turn the VIBRATO channel volume to "10." Adjust the Master Volume Control to the desired sound level. The amount of distortion is variable: Increasing the VIBRATO channel volume while decreasing the Master Volume adds distortion; decreasing the VIBRATO channel volume while increasing the Master Volume makes the sound "cleaner." Make sure that the guitar is plugged into input jack number 1. MAXIMUM DISTORTION To get the most distortion, turn the VIBRATO channel volume control to "10." Pull the Master Volume Control out and adjust it to the desired sound level. NOTE: It is important to have the volume and tone controls of the guitar turned to their maximum to get the most distortion from the amplifier. Jeweled Pilot Light -Indicates when amplifier is turned on.