Fender Bullet Reverb Owner Manual - Page 3

Bullet / Bullet Reverb Front Panel Functions

Get Fender Bullet Reverb PDF manuals and user guides View all Fender Bullet Reverb manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

Bullet / Bullet Reverb Front Panel Functions A B CDE F G H I J KLM A. INPUT - A high impedance, high sensitivity plug-in connection for instruments. B. NORMAL VOLUME - Adjusts the overall loudness of the Normal Channel. C. GAIN - Adjusts the amount of preamp amplification in the Drive Channel. Cleaner sound is achieved at lower gain settings; high gain settings will produce more sustain and distortion. This control works in conjunction with the DRIVE VOLUME control (item E) to set the overall loudness of the Drive Channel. D. DRIVE SELECT - Activates the Drive Channel. E. DRIVE VOLUME - Adjusts the overall loudness of the Drive Channel. F. TREBLE - Adjusts the amount of boost or cut in the high frequency range. G. MID - Adjusts the overall tone quality without affecting the signal level. High MID settings will provide emphasis in the midrange frequencies whereas a lower setting will notch the midrange to produce sounds characteristic of most "metal" music. H. BASS - Adjusts the amount of boost or cut in the low frequency range. I. REVERB - ( BULLET REVERB ONLY.) Adjusts the amount of reverberated signal mixed with the original dry signal for both the Normal and Drive channels. J. EXTERNAL SPEAKER - This jack provides an output to an external speaker enclosure. The enclosure must have a minimum impedance of 8Ω Use of this jack automatically disables the internal speaker. DO NOT PLUG HEAD PHONES IN HERE. K. HEADPHONES - This jack provides an output to standard stereo or mono headphones for private listening. NOTE: Use of this jack automatically disables the speaker. CAUTION: Prolonged listening at high levels may be hazardous to your hearing! This jack can also be used as an unbalanced line output by using either a stereo or mono 1/4 inch phone plug connection. L. POWER INDICATOR - When this indicator is illuminated the Bullet / Bullet Reverb is receiving AC power. M. POWER SWITCH - This switch turns the AC power ON and OFF. When the switch is OFF the amplifier is completely shut down. LINE CORD - This amplifier is equipped with a grounding type supply cord to reduce the possibility of shock hazard. Be sure to connect it to a grounded receptacle. DO NOT ALTER THE AC PLUG.

  • 1
  • 2
  • 3
  • 4
Bullet / Bullet Reverb Front Panel Functions
A.
INPUT -
A high impedance, high sensitivity plug-in
connection for instruments.
B.
NORMAL VOLUME -
Adjusts the overall loudness of the
Normal Channel.
C.
GAIN -
Adjusts the amount of preamp amplification in
the Drive Channel. Cleaner sound is achieved at lower
gain settings; high gain settings will produce more
sustain and distortion. This control works in conjunction
with the
DRIVE VOLUME
control (item E) to set the overall
loudness of the Drive Channel.
D.
DRIVE SELECT -
Activates the Drive Channel.
E.
DRIVE VOLUME -
Adjusts the overall loudness of
the
Drive Channel.
F.
TREBLE -
Adjusts the amount of boost or cut in the high
frequency range.
G.
MID -
Adjusts the overall tone quality without affecting
the signal level. High MID settings will provide emphasis
in the midrange frequencies whereas a lower setting will
notch the midrange to produce sounds characteristic of
most “metal” music.
H.
BASS -
Adjusts the amount of boost or cut in the
low
frequency range.
I.
REVERB -
( BULLET REVERB ONLY.) Adjusts the amount
of reverberated signal mixed with the original dry
signal for both the Normal and Drive channels.
J.
EXTERNAL SPEAKER -
This jack provides an output to
an external speaker enclosure. The enclosure must
have a minimum impedance of 8
Ω
Use of this jack
automatically disables the internal speaker.
DO NOT
PLUG HEAD PHONES IN HERE.
K.
HEADPHONES -
This jack provides an output to
standard stereo or mono headphones for private
listening. NOTE: Use of this jack automatically disables
the speaker. CAUTION: Prolonged listening at high
levels may be hazardous to your hearing! This jack can
also be used as an unbalanced line output by using
either a stereo or mono 1/4 inch phone plug
connection.
L.
POWER INDICATOR -
When this indicator is
illuminated the Bullet / Bullet Reverb is receiving AC
power.
M.
POWER SWITCH -
This switch turns the AC power ON
and
OFF.
When the switch is
OFF
the amplifier is
completely shut down.
LINE CORD -
This amplifier is equipped with a grounding
type supply cord to reduce the possibility of shock hazard.
Be sure to connect it to a grounded receptacle.
DO NOT
ALTER THE AC PLUG.
A
B
C
D
E
F
G
H
I
J
K
L
M