Fender Champ 12 Owner Manual - Page 6
grounding type - tubes
View all Fender Champ 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
FUSE This fuse is in the AC supply of the amplifier and will help to protect the amplifier and operator in the event of electrical fault. If a fuse blows, it should only be replaced with a fuse in accordance with the listing at the fuse holder. If the amplifier repeatedly blows fuses, it should be checked out by a qualified technician. Under no circumstances should a fuse with a higher current rating or a fuse bypass be used as this could cause equipment damage and present a serious safety hazard. LINE CORD This amplifier is equipped with a grounding type supply cord to reduce the possibility of leakage current. Be sure to connect it to a grounded receptacle. Operation from an ungrounded (two pronged) AC receptacle requires a three to two contact grounding type adapter. Be sure to connect the adapter's grounding lead to a good earth ground. DO NOT ALTER THE AC PLUG. TUBES The CHAMP 12 tube complement consists of one Fender Special Design 6L6GC (P/N 023556) and two Fender Special Design 7025's (P/N 013341). Fender's Special Design electronic tubes provide optimum performance in this amplifier. For best results, replace with Fender original equipment tubes only.