Fender FM 100H Owners Manual - Page 6

6 FM 100H Amplifier Your new FM 100H amplifier delivers world-class Fender® tone and world-standard Fender® quality: • 100W output power into 4 ohms • Selectable Normal and Drive channels with independent volume and tone controls • MORE DRIVE pre-amp boost for instant gain saturation and harmonically rich leads • MID-CONTOUR button allows for many different variations in distortion-from Rock to Blues to Metal to whatever! • Classic Fender® spring Reverb • Fender® "touch-sensitive" circuit design simulates the feel of tube distortion • PRE-AMP OUT and POWER-AMP IN jacks allow you to connect external effects devices, other amplifiers or sound/recording equipment to your FM 100H • FOOTSWITCH jack for use with a 2-button Fender® footswitch (included). A footswitch provides remote channel selection and drive/more drive switching Thank you for choosing Fender®®-The World's most popular instrument amplifiers-since 1946 NOTE: The footswitch and power cord are stored behind the front grille of the FM100H cabinet. Access by pulling on both tabs at the bottom edge of the grille. Front Panel 12 INPUTS VOLUME TREBLE MID BASS CH SELECT MORE DRIVE DRIVE VOLUME TREBLE MID CONTOUR MID BASS REVERB FOOT SWITCH PRE OUT PWR IN FENDER MUSICAL INSTRUMENTS A. INPUTS - Plug your guitar in here: INPUT 1 is normal sensitivity for most guitars, INPUT 2 is lower sensitivity for guitars with high output (active) pickups. B. VOLUME - Adjusts the loudness of the Normal channel. C. TREBLE/MID/BASS - Adjusts the tone of the Normal channel in the high/middle/low frequency ranges. D. DRIVE CHANNEL INDICATORS - Yellow LED ON Drive channel is active Red LED ON More Drive channel is active E. DRIVE - Adjusts the distortion level of the Drive channel. F. CHANNEL SELECT Button OUT selects the Normal channel Button IN selects the Drive channel G. VOLUME - Adjusts the loudness of the Drive channel together with DRIVE {E}. H. MORE DRIVE - Boosts the intensity and range of the DRIVE control {E}. Button OUT selects the Drive channel Button IN selects the More Drive channel I. TREBLE/MID/BASS - Adjusts the tone of the Drive channel in the high/middle/low frequency ranges. J. MID-CONTOUR - Activates a "scooped" midrange EQ, useful for modern distortion sounds in the Drive channel. K. REVERB - Adjusts the Reverb level for both channels. L. FOOTSWITCH - Plug in the included 2-button Fender® footswitch to enable remote switching of CH SELECT, and DRIVE/MORE DRIVE. When connected, the footswitch overrides the front panel buttons. M. PRE OUT/PWR IN - (1) Effects Loop - Connect PRE OUT to an effects device input, then connect the effects device output to PWR IN. (2) Multiple Amps Connect the primary amplifier's PRE OUT to the auxiliary amplifier's PWR IN. The primary amp is used to control all auxiliary amps. (3) Recording or Reinforcement - Connect PRE OUT to sound equipment's input. Both jacks use a TS (Tip-Sleeve) standard type plug for connections. PRE OUT includes onboard tone shaping. N. POWER INDICATOR - Illuminates when the amplifier is on. ✧ f e n d e r. c o m ✧