Fender Fighter 10 Owner Manual - Page 2

Fender Fighter™ Powered Loudspeakers Thank you for choosing the Fender Fighter series two-way powered loudspeaker. Designed to provide exceptional fidelity, reliability and ease of use, it delivers maximum flexibility, including three input channels with two-band EQ (for mic, line and auxiliary sources), Bluetooth audio streaming and durable styling. Other premium Fighter features include: • 10" (Fighter 10) and 12" (Fighter 12) low-frequency speakers • 1" titanium horn-loaded high-frequency compression driver • 1,100-watt class "D" power amplifier with active crossover • Dynamic limiting circuitry for continuous headroom monitoring and seamless system gain adjustment for maximum clean power without distortion • Dual tuned-port system for extended bass response • Loop output with subwoofer crossover switch • Rugged, compact and lightweight wood enclosure with vinyl covering, perforated steel grille, durable protective corners and dual rear handles • 35 mm pole-mount socket Controls and Features A. CHANNEL TREBLE CONTROL: Treble frequency boost/cut; one for each of the three channels. Control is "flat" in center position (no effect on channel sound). H. AUX/BT INPUT: Provides 3.5 mm connection for auxiliary devices such as MP3 players, computers and other line-level stereo sources. Defeats Bluetooth module when in use. B. CHANNEL BASS CONTROL: Bass frequency boost/cut; one for each of the three channels. Control is "flat" in center position (no effect on channel sound). C. CHANNEL VOLUME CONTROL: Adjusts volume of each channel relative to volume of other channels. D. 1/4" INPUT: For connection of line-level input sources to channels one and two (left and center channels). E. LINE/MIC INPUT SWITCH: Selects input sensitivity for channels one and two (left and center channels). "Out" position is for linelevel input sources such as mixers, keyboards and amplifier line outputs. "In" position is for dynamic microphones. I. BT PAIR SWITCH: Activates Bluetooth module for pairing with external devices. After a device is paired, unit will search for device when power is on; Bluetooth module will enter "standby" mode if no connection is established after 15 minutes. J. MASTER VOLUME CONTROL: Adjusts overall volume level of all three channels. K. FULL RANGE/SUBWOOFER SWITCH: "Out" position is for fullrange frequency response. "In" position activates internal highpass speaker crossover, limiting lower bass frequencies to Fighter speaker when using an external subwoofer. L. POWER INDICATOR LIGHT: Illuminated when unit is on. F. XLR INPUT: Input for connection of microphones and line-level M. POWER CORD: Connect to a grounded outlet in accordance with input sources to channels one and two (left and center channels). the voltage and frequency specifications. G. LOOP OUTPUT: XLR output for connection to additional Fighter speakers or external subwoofer. Provides full-range signal for all three channels. N. POWER SWITCH: Turns unit on and off. ENGLISH TYPE POWER AMP FREQUENCY RESPONSE MAXIMUM SPL SPEAKERS NOMINAL COVERAGE FUSE DIMENSIONS AND WEIGHT 2 Specifications 5205 1,100 watts class "D" Fighter 10: 55 Hz-20 kHz Fighter 12: 50 Hz-20 kHz 130 dB Fighter 10: One 10" woofer, one 1" compression driver Fighter 12: One 12" woofer, one 1" compression driver Fighter 10: 90 degrees horizontal, 35 degrees vertical Fighter 12: 90 degrees horizontal, 30 degrees vertical T4AL 250V (100V-120V) T2AL 250V (220V-240V) Fighter 10: Width: 12" (30.5 cm) Height: 20.5" (52 cm) Depth: 12.9" (32.7 cm) Fighter 12: Width: 13.5" (34.3 cm) Height: 22.5" (57.2 cm) Depth: 15.1" (38.4 cm) Product specifications subject to change without notice. Weight: 28 lbs. (12.7 kg) Weight: 32 lbs. (14.5 kg)