Fender Super Champ Owner Manual - Page 7

Panel, Functions

Page 7 highlights

REAR PANEL FUNCTIONS FUSE CAUTION: To reduce the risk of fire, replace only with same type 1 amp, 125 volt minimum slo-blo fuse. ..PEAKER LEADS Black lead connects to speaker lug which is connected to the frame. White lead connects to other speaker lug. REPLACEMENT PARTS Under the terms of the limited warranty, defective parts will be replaced by your authorized Fender dealer. Fender Original Equipment tubes are designed and built to provide optimum performance in musical instrument amplifiers. To maintain best performance and quiet operation, replacement should be made with original equipment tubes. Fender Musical Instruments furnishes warranty service through authorized Fender dealers. CORRECTIVE CHECKLIST If your amp is set up but does not function, check the following items: Is the amp power cord properly plugged into an electrical outlet? Is there power at the outlet where the amp is plugged in? Is the primary fuse blown? Is the speaker properly connected to the amplifier? Are all the control knobs turned up above 4? Is the volume control on your instrument turned up? Is your instrument properly plugged into the amp?

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

REAR
PANEL
FUNCTIONS
FUSE
CAUTION:
To
reduce
the
risk
of
fire,
replace
only
with
same
type
1
amp,
125
volt
minimum
slo-blo
fuse.
..PEAKER
LEADS
Black
lead
connects
to
speaker
lug
which
is
con-
nected
to
the
frame.
White
lead
connects
to
other
speaker
lug.
REPLACEMENT
PARTS
Under
the
terms
of
the
limited
warranty,
defective
parts
will
be
replaced
by
your
authorized
Fender
dealer.
Fender
Original
Equipment
tubes
are
designed
and
built
to
provide
optimum
performance
in
musical
in-
strument
ampl
ifiers.
To
maintain
best
performance
and
quiet
operation,
replacement
should
be
made
with
original
equip-
ment
tubes.
Fender
Musical
Instruments
furnishes
warranty
service
through
authorized
Fender
dealers.
CORRECTIVE
CHECKLIST
If
your
amp
is
set
up
but
does
not
function,
check
the
following
items:
Is
the
amp
power
cord
properly
plugged
into
an
electrical
outlet?
Is
there
power
at
the
outlet
where
the
amp
is
plugged
in?
Is
the
primary
fuse
blown?
Is
the
speaker
properly
connected
to
the
ampl
ifier?
Are
all
the
control
knobs
turned
up
above
4?
Is
the
volume
control
on
your
instrument
turned
up?
Is
your
instrument
properly
plugged
into
the
amp?